Need help?Do you have a question about the RME Audio ADI-2 and is the answer not in the manual?
Details AD and DA specifications, including resolution, frequency response, SNR, THD, crosstalk, and input/output levels.
Covers clocking, jitter, PLL, and supported sample rates for digital interfaces.
Specifies digital input/output formats, transformer coupling, and connector types.
Details balanced line inputs via XLR and 1/4" TRS, input sensitivity, and level meter functionality.
Describes balanced line outputs, impedance, and the 'Fixed-Adjust' option for volume control.
Covers the stereo TRS headphone output, its level control, and impedance.
Explains coaxial and optical digital inputs, format detection, and ADAT S/MUX support.
Details ADAT, PRO, and CON output modes, as well as SPDIF/AES compatibility and sample rate support.
Provides contact details for the manufacturer, IMM Elektronik GmbH.
Lists registered trademarks and copyright information related to the product and manual.
General| Channels | 2 |
|---|---|
| A/D Resolution | 32-bit |
| D/A Resolution | 32-bit |
| Analog Inputs | 2 x XLR/TRS combo |
| Analog Outputs | 2 x XLR, 2 x TRS |
| Power Supply | External power supply |
| Bit Depth | up to 32-bit |
| Type | AD/DA Converter |
| Sample Rates | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz |
| Digital Inputs | 1 x Optical, 1 x Coaxial |
| Digital Outputs | 1 x Optical, 1 x Coaxial |
| Weight | 1 kg |
To Next Page
