To Next PageTo Next Page
Need help?Do you have a question about the RME Audio Fireface UC and is the answer not in the manual?
General| Analog Inputs | 8 |
|---|---|
| Analog Outputs | 8 |
| Digital Inputs | 2 |
| Digital Outputs | 2 |
| Headphone Output | 1 |
| Phantom Power | Yes |
| Max Sample Rate | 192 kHz |
| Bit Depth | 24-bit |
| A/D Resolution | 24-bit |
| D/A Resolution | 24-bit |
| Computer Connectivity | USB 2.0 |
| Word Clock | Yes |
| Digital I/O | ADAT, SPDIF |
| Software | TotalMix FX |
| Audio Interface Type | USB |
| Sample Rates | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz |
| USB | USB 2.0 |
Detailed description of the physical inputs, outputs, and controls on the front panel.
Guide for installing the necessary drivers for the Fireface UC on Windows.
Instructions on how to update the installed drivers for the Fireface UC.
Process for updating the firmware on the Fireface UC device.
Overview of general settings like buffer size, sample rate, and digital I/O.
Essential settings for clock synchronization between digital audio devices.
Troubleshooting common issues encountered when using ASIO.
Common issues and solutions for Fireface UC setup and operation.
Steps for installing the drivers on a Mac OS X system.
Procedure for updating drivers on Mac OS X.
Process for updating the device firmware on Mac OS X.
Configuration options available in the Mac OS X settings dialog.
Setting up clock synchronization for Mac OS X environments.
How to use the physical controls and display on the front panel.
Specifications for the front microphone and line inputs.
Specifications for the front instrument and line inputs.
How to connect and use word clock for synchronization.
Introduction to TotalMix, RME's real-time mixer and its capabilities.
Detailed breakdown of the TotalMix mixer's graphical user interface.
Explanation of faders, mute, solo, panorama, and level meters in TotalMix.
Features and functions of the Control Room section in TotalMix.
Description of the fixed Control Strip elements in TotalMix.
Customizing the display and layout of the TotalMix interface.
Configuring global preferences for TotalMix operation.
Specific mixer settings including Talkback, Listenback, and Main Out.
Introduction to the matrix display for routing and gain adjustment.
Explanation of signal lock and the SyncCheck feature.
Detailed information on latency, buffer sizes, and monitoring.
Detailed explanation of SteadyClock for jitter reduction and stable clocking.
