Need help?Do you have a question about the RME Audio Hammerfall HDSP 9652 and is the answer not in the manual?
Provides step-by-step instructions for installing the HDSP 9652 PCI card and expansion board.
Covers driver and firmware management for the HDSP 9652.
Guides users on how to update the HDSP 9652 firmware using the Flash Update Tool.
Explains how to select the HDSP 9652 as an output device for audio playback applications.
Describes how to use multiple programs (ASIO, WDM, GSIF) simultaneously with the HDSP 9652.
Guides users on setting up digital recording, including sync status and sample frequency.
Explains how to select the HDSP 9652 as the ASIO device and access its settings.
Discusses common issues like dropouts, crackling, and synchronization problems in ASIO.
Provides steps to achieve sample-accurate synchronization between ADAT and Cubase using ADAT sync.
Details how to synchronize and use multiple HDSP 9652 units together.
Covers general troubleshooting advice and common issues like no real-time monitoring or ADAT channel problems.
Covers driver installation, updates, and firmware flashing for Mac OS X.
Details the process of installing the HDSP 9652 drivers on Mac OS X.
Explains how to update existing drivers on Mac OS X without removing the old ones.
Guides on updating the HDSP 9652 firmware using the Flash Update Tool on Mac OS X.
Describes the options in the Mac OS X Settings dialog, including SPDIF, AEB, Clock Mode, and SyncCheck.
Details Clock Mode, Pref Sync Ref, System Clock, SyncCheck, Word Clock, and Time Code settings.
Explains clock modes and synchronization for Mac OS X, including AutoSync and Pref. Sync Ref.
Discusses SyncCheck, synchronization examples, and sample rate handling at 88.2/96 kHz in Mac OS X.
Addresses problems with ADAT channels, playback, recording, and crackling.
Troubleshoots installation failures, driver recognition, and playback problems.
Details the digital input and output connections for the HDSP 9652.
Provides an overview of TotalMix features and typical applications like submixes and routing.
Explains the layout and structure of the TotalMix user interface, including inputs, playback, and outputs.
Provides a guided walkthrough of TotalMix functionality, including submix creation and routing.
Explains ASIO Direct Monitoring (ADM) and how TotalMix reflects ADM gain/pan changes.
Discusses latency concepts, zero latency monitoring, and buffer size effects on the HDSP 9652.
To Next Page
General