Need help?Do you have a question about the RNG Kraus Group MICON 500C and is the answer not in the manual?
Details on connecting the MICON 500C handle switch to the dispenser handle for proper operation.
Instructions for rotating the actuator shaft to achieve the ON position for the pump handle.
Critical safety warnings and precautions for wiring installation, including regulatory compliance.
Detailed breakdown of wire connections and functions for North American installations.
Detailed breakdown of wire connections and functions for European installations.
Details on connecting the MICON 500C to various communication interfaces like Tokheim, Gilbarco, RS-422.
How to access and change prices using the Console (MCIU) or Monitor 4 systems.
Using the handheld communicator for reading totals and setting prices on the MICON 500C.
Details on sales at two different prices, including discounts for cardholders.
Information on non-resettable event counters for tracking configuration changes and regulatory compliance.
Overview of the ambient temperature compensation system for CNG fills based on ideal gas law.
Details of the hardware inputs and components used in the PFS 3000/3600 system.
Description of software algorithms for end-of-fill pressure prediction and system functions.
Conditions that can terminate a fill, including pressure, switch triggers, and timeouts.
Explanation of delays for stabilizing pressure and handling transient noise during fills.
Safety features to prevent excessive flow or detect hose ruptures, with adjustable settings.
Configurable parameters for turbine meters and pressure/temperature compensation systems.
Security measures for mechanical/electrical failures of input/output devices.
Use of redundant pressure transducers for verification and backup.
Conditions that trigger alarms and system shutdowns, and methods for resetting.
To Next Page
General