String Winder & Metronome
Roadie 3 isn’t just your regular tuner. It is an all-in-one tool that comes with a built-in string winder
and metronome.
Restringing with Roadie 3
String changes are a little less tedious now. Roadie 3 will now very quickly wind your new string to
tension with a motor speed of 120 RPM and then tune it up, all in one smooth step!
Here’s how to do it:
● Navigate to Main Menu > Winder and use the winder to remove your old string
● To restring and tune in one step, navigate back to Main Menu > Tuner > Select your
instrument > Select the note corresponding to the new string > Click and hold the right
button on the navigation pad and Roadie 3 will automatically tighten your string
● When the string is not loose anymore and can vibrate then stop pressing and pluck
normally to continue tuning. Be careful not to snap the string by tightening it too much
Using the metronome
Roadie 3 now comes with a built-in vibration/beep metronome to help you keep a tight rhythm.
To use the metronome:
● Turn on your Roadie
● Scroll down to Metronome and right-click
To modify the metronome settings press the right navigation button to access the metronome
settings menu.
You can change the BPM value, the number of beats and you can switch off and on the vibration
and the beeping sound.
To Next Page
