To Next Page

To Previous Page

3 English

TO USE THE RADIO

1. Set the Mains [POWER SWITCH] (0) to ON;

2. Press the [POWER] button (2) to turn ON the unit;

3. Select the desired audio source by pressing the [SOURCE] button (7 to 11);

4. (Please see detailed instructions for each Source in the following chapters);

5. Adjust the volume with the [VOLUME KNOB] (3) to the desired level;

6. Press and hold the [POWER] button (2) to turn OFF the unit.

Note: When no sound is produced, the unit will switch OFF automat. after 10 minutes.

RADIO OPERATION

1. Press the [FM] button (8);

2. Adjust radio frequency to your desired station by turning the [TUNING KNOB]

(19).

Note: For a better reception move the wired antenna (23) around.

TURNTABLE OPERATION

Note: When using the turntable for the first time, unscrew in clockwise sense the

[TRANSPORT SCREW] (27) located on the upper right side of the turntable.

1. Press the [PHONO] button (11);

2. Place a record on the turntable. Place the EP adapter over the central spindle

when playing 45 rpm records;

3. Set the [SPEED SELECTOR] (31) to 33, 45 or 78 rpm according to the record;

4. Release the [TONEARM CLAMP] (29), and remove the stylus protector;

5. Lift up the [TONEARM] (28) with the [LIFT LEVER] (30);

6. Move the [TONEARM] (28) to the beginning of the record;

7. Lift down the [TONEARM] (28) with the [LIFT LEVER] (30);

8. When the record is finished the [TONEARM] (28) will automatically return to the

rest support and the [PLATE] (26) will stop turning. To stop manually, lift up the to-

nearm from the record and return it to the rest support.

Note: Do not stop or turn the [PLATE] (26) manually.

When the unit is moved or transported:

•

Lock the [TONEARM] (28) with the [TONEARM CLAMP] (29);

•

Place the protective cap on the stylus (even when not in use);

•

Screw the [TRANSPORT SCREW] (27) counterclockwise until you feel resistan-

ce (do not screw it completely).

CD-MP3 OPERATION

1. Press the [CD] button (9);

2. Press [OPEN/CLOSE] (18) to open the [CD DOOR] (12) and place a CD with the

label up in the CD compartment.

3. Close the [CD DOOR] (12). Focus search is performed and playback will start

automatically from the first track.

PROGRAMMING

Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.

Brand	Roadstar
Model	HIF-1993DBT
Category	Stereo System
Language	English

Roadstar HIF-1993DBT User Manual

Table of Contents

Questions and Answers:

Roadstar HIF-1993DBT Specifications

Related product manuals