EasyManuals Logo

Roadstar HIF-1993D+BT User Manual

Roadstar HIF-1993D+BT
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
6
English
TAPE OPERATION
1. Select “TAPE” mode by pressing repeatedly the [FUNCTION] button (4);
2. Insert a cassette TAPE into the [CASETTE MECHANISM] (22);
3. The system will start playback automatically;
Press [TAPE FORWARD/EJECT] button (21) half way during playback to start ra-
pid tape winding in forward direction.
Slightly press the [TAPE FORWARD/EJECT] button (21) again to resume
playback.
Press the [TAPE FORWARD/EJECT] button (21) completely inwards and the cas-
sette tape will be ejected.
BLUETOOTH OPERATION
1. Select “BT” mode by pressing repeatedly the [FUNCTION] button (4);
2. Connect your Bluetooth portable device to the ID Bluetooth tagged as “HIF-
1993D+BT”;
3. You can now transfer the music to the HIF-1993D+BT.
Note:
Music control (play, pause, etc) must be done from your ext. device.
AUX-IN OPERATION
1. Select “PHONO” mode by pressing repeatedly the [FUNCTION] button (4);
2. Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the
[AUX-IN SOCKET] (25);
Note: Music control (play, pause, etc) must be done from your external device.
DIRECT USB ENCODING
Remark:
Recording speed is 1:1.
No song title will be recorded during encoding mode.
To avoid damage to USB memory, remove it only when the radio is turned off.
ENCODE FROM DAB RADIO, PHONO, CASSETTE, BLUETOOTH AND AUX-IN:
1. Plug the USB stick into the [USB PORT] (1);
2. Perform normal playback of the source you want to encode & record;
3. Press the [RECORD] button (5) twice to start encoding. On the display will flash
“USB”;
4. Once the record is finished, press the [STOP] button (14) to stop recording.
ENCODE FROM CD:
1. Plug the USB stick into the [USB PORT] (1);
2. Perform normal playback of the CD you want to encode & record;
3. After focus search is completed, press the [RECORD] button (5);
4. Press repeatedly the [SKIP -/+] button (15/16) during the playback to select the
desired encoding option:
REC-1: Select to record only the current track;
REC-F: Select to record the whole folder;

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roadstar HIF-1993D+BT and is the answer not in the manual?

Roadstar HIF-1993D+BT Specifications

General IconGeneral
BrandRoadstar
ModelHIF-1993D+BT
CategoryStereo System
LanguageEnglish

Related product manuals