4 English
2. Press [OPEN/CLOSE] (7) to open the [CD DOOR] (6) and place a CD with the label
up in the CD compartment.
3. Close the [CD DOOR] (6). Focus search is performed and playback will start auto-
matically from the first track.
PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
1. Stop the playback by pressing [STOP] (14);
2. Press [PROGRAM] (9), the display (5) will show the number of the track on
the left side and the number of program on the right side.
3. Select desired track by using [SKIP -/+] buttons (10/11);
4. Press [PROGRAM] (9) to confirm desired track into the program memory;
5. Repeat step 3 and 4 to enter additional tracks into the program memory.
6. When all the desired tracks have been programmed, press [PLAY] (12) to play the
disc in the order you have programmed.
Note: Press [STOP] (14) twice to terminate programmed play.
BLUETOOTH OPERATION
1. Select “BT” mode by by turning the [MODE] knob (1);
2. Connect your Bluetooth portable device to the ID Bluetooth tagged as “HRA-
1782ND+BT”;
3. You can now transfer the music to the HRA-1782ND+BT.
Note: Music control (play, pause, etc) must be done from your external device.
AUX-IN OPERATION
1. Use one male RCA to male 3.5mm jack cable (not included) to connect any exter-
nal audio device to the [AUX-IN SOCKET] (18);
2. Select “AUX” mode by turning the [MODE] knob (1).
Note: Music control (play, pause, etc) must be done from your external device.
USB OPERATION
1. Select “USB” mode by turning the [MODE] knob (1);
2. Plug an USB stick into the [USB PORT] (3);
3. Playback will start automatically from the first track.
PROGRAMMING
The PROGRAMMING operation is the same as that of CD-MP3.
Notes:
• Some mp3 player may not be able to play via the usb socket. this is not a maul-
function of the system.
• To avoid damage to USB memory, remove it only when the radio is turned off.
• The USB port is not designed for charging smartphones or other devices.
DIRECT USB ENCODING
Remark:
• Recording speed is 1:1.
To Next Page
