3 English
CLOCK
In stand-by mode:
1. Press and hold the [PLAY-PAUSE / CLOCK] (3) button for approx. 2 seconds un-
til the display shows "12/24 Hr";
2. Press the [SKIP -/+] buttons (5/6) to choose 12 or 24 hour format;
3. Confirm with the [PLAY-PAUSE / CLOCK ] (3) button;
4. Press the [SKIP -/+] (5/6) buttons to adjust the hour;
5. Confirm with the [PLAY-PAUSE / CLOCK / ENTER] (3) button;
6. Press the [SKIP -/+] (5/6) buttons to adjust the minutes;
7. Confirm with the [PLAY-PAUSE / CLOCK] (3) button;
RADIO
1. Select the RADIO mode with the [STANDBY / FUNCTION] (2) button, until “rAd”
is shown in the display.
2. Adjust radio frequency to your desired station as follows:
MANUAL SCAN: Use the [SKIP / TUN -/+] (5/6)buttons to fine tune your desired sta-
tion or press and hold the [SKIP / TUN -/+] (5/6) buttons to scan the next/previous
available station.
AUTO SCAN: Press & Hold [SCAN] (11) button about 3 seconds to start automatic
scan.
Preset station:
Automatic Preset:
1. Press and hold the [SCAN / MODE] (11) button on unit for about 2-3 seconds to
start the automatic preset process.
2. Display will show the memory sequence number and radio stations will be auto-
matically preset into the sequence number (Note: Each sequence number means
1 preset station while during automatic preset process.)
3. Once all the stations were automatic preset, press the [PRESET / FOLDER/
STOP] (4) button, the display will show “PrE” then press [SKIP+ / TUN+] or
[SKIP-/ TUN-] buttons (5-6) to choose the preset stations.
Manual Preset:
1. Use the above “Manual scan for radio stations” method to choose your desired
radio stations.
2. Press [SCAN / MODE] (11) button. “P01” (Storage space) and the notification
“PROG” will appear in the display.
3. Use the [SKIP+ / TUN+] or [SKIP- / TUN-] (5-6) buttons to select the memory
slot (P01 - P30) and then press the [SCAN / MODE] (11) button to confirm.
4. The desired radio stations will be saved at your requested memory slot.
5. Press the [PRESET / FOLDER / STOP] (4) button, the display will show “PrE”
then press [SKIP+ / TUNING+] or [SKIP- / TUNING-] (5-6) buttons to choose the
preset stations.
To Next Page
Loading...
Need help?
General
