4 English
TAPE OPERATION
1. Select “TAPE” mode by pressing the [FUNCTION] (2)button;
2. Press [STOP/EJECT] (15.2) button to open the cassette door (12) and insert your
tape;
3. Close the cassette door (12);
4. Press [PLAY] (15.5) button to start playing tape.
5. Press [PAUSE] (15.1) button when you want to stop playing tape operation tem-
porarily, press again to resume tape operation.
6. Press [STOP/EJECT] (15.2) button when finished, press again to open the cas-
sette door.
7. Press [F.FWD] (15.3) button or [RWD] (15.4) button to start rapid tape winding
forward / reverse direction.
CD-MP3 OPERATION
1. Select the CD mode with the [STANDBY / FUNCTION] (2) button, until “Cd” is
shown in the display.
2. Insert an audio CD with the printed side facing upwards and then close the lid of
the CD compartment.
3. In order to remove a CD, please press the [PRESET/FOLDER/STOP] (4) button,
open the CD compartment and lift the CD out carefully.
4. During the playback of MP3 disc, you can press and hold [PRESET/FOLDER/
STOP] (4) button the display will show “FOld” then press [SKIP+ / TUNING+] &
[SKIP- / TUNING-] (5-6) buttons to chose folder.
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the [PRESET / FODER/STOP] (4) button.
2. Press the [SCAN / MODE] (11) button. “P01” (Storage space) and the notification
“PROG” will appear in the display.
3. Use the [SKIP+ / TUNING+] & [SKIP- / TUNING-] (5-6) buttons to select the desi-
red track and then press the [SCAN / MODE] (11) button again.
4. The display changes to memory slot P02.
5. Select the next track with the [SKIP+ / TUNING+] & [SKIP- / TUNING-] (5-6) but-
tons and press the [SCAN / MODE] (11) button again. Repeat the procedure until
all the desired tracks are selected.
NOTE:
1. Once the storage capacity of the tracks to be programmed has been reached
“FUL” flashes in the display.
2. Press the [CLOCK / PLAY / PAUSE] (3) button. The playback starts.
3. To delete the program, press the [PRESET / FOLDER/STOP] (4) button twice.
The notification “PROG” will disappear.
To Next Page
Loading...
Need help?
General
