3 English
ALARM OFF
During Alarm on, press SET button (3) or ON/OFF button (5). The alarm sound goes
off but theAlarmsetting remains.
ALARM VOLUME SETTING
In Radio Alarm, the Alarm Volume is setwith the last volume level used during
playback. In BuzzerAlarm, theAlarmlevel is fixed.
WAKE TO BUZZER ALARM
Alarm1 and Alarm2 both have “wake to buzzer Alarm” function
1. Set the Alarm time as shown above
2. Turn the Tuning knob to set Alarm to wake up to Buzzer alarm
WAKE TO MUSIC
1. Repeat the steps of Alarm Time Setting Alarm1 and Alarm2 both have the “wake
tomusic” function.
2. Press the Alarm button (11) once to set the desired Alarm 1 time.
3. Press the Alarm button (11) twice to set the desired Alarm 2 time.
4. Turn the Tuning Knob (4) once after alarm setting to activate wake to Radio fun-
ction.
5. After finish the Alaem 1 or Alarm 2 time setting, press the SET button (3) once to
confirm alarm timer setting.
6. The RadioMemory icon appear in the display. During that time, turn the Tuning +/-
knob to select the desired Radio station stored in the memory before.
7. Press the Set button (3) to confirm.
8. Press the ON/OFF button (5) to turn ON the unit, then adjust the Volume to the
desired level. Press theON/OFF button (5) to switch OFF theRadio, then it switch
ON automatically at the preset Alarm time.
SLEEP FUNCTION
Press ON button (5) to switch ON the radio.Press the Snooze/SleepButton (10) se-
quentiually to display will show 90, press again is 80/70/60/50.....10, then press again
is off. After set the Sleep function and when finish, then the unit will off automatically.
SNOOZE
The alarm can be temporarily turned off manually by pressing the SNOOZE button
(10); the alarm will turn back on 5 minutes later automatically. This feature can be re-
peated endlessly.
HEADPHONES
Headphones should have a 3.5mmdiameter stereo plug and an impedance of 8-32
ohms. When headphones are connected (6), the speaker is automatically disconnec-
ted.
To Next Page
Loading...
Need help?
General
