English
Store Radio Stations manually
This unit can store 24 stations (8 FM, 8 AM and 8 SW).
1. Tune the desired station as explained above
2. Press the SET button (3) to enter in preset mode
3. The icon “CH” flash and appear in the display
4. Press the M+ or M- buttons (8 or 9) to choose the preset number, from 1 to 8.
5. Press the SET button (3) to confirm the memory setting.
Store Radio Stations automatically
Keep pressed the SET button (3) 3 seconds and the Radio will be stored in the me-
mory sequencially.
CLOCK SETTING
Make sure the POWER switch is set to the 'Off' position. The time or alarm time can-
not be set or adjusted while the unit is 'On'.
1. Press the SET button (3) and the display will show the minute 00 will flash and
turn the Tuning Knob (4) to select the minute.
2. Press the SET button (3) again to confirmsetting, then the Display will show 00:00
and the first 00 will flash, then turn the Tuning Knob (4) to select the correct hours.
3. Press the SET button (3) again to confirmsetting, then the Display will show 24H
will flash, then turn the Tuning Knob (4) to select the 12H or 24H.
4. Press the SET button (3) to confirm the clock setting,
CALENDAR SETTING
When the display shows the time, press MODE button (2) and shows calendar mode.
1. Press SET button once (3) to select the year
2. Turn the Tuning Knob (4) to set the correct year
3. Press SET button (3) again to select the month
4. Turn the Tuning Knob (4) to set the correct month
5. Press SET button (3) again to select the day
6. Turn the Tuning Knob (4) to set the correct day
7. Press SET button (3) to confirm the calendar setting
ALARM SETTING
Make sure the POWER switch is set to the 'Off' position. The time or alarm time can-
not be set or adjusted while the unit is 'On'.
1. Press the Alarm button (11) and select the Alarm 1 or Alarm 2
2. Press the SET button (3) and the display will show the minute 00 will flash and
turn the Tuning Knob (4) to select the minute.
3. Press the SET button (3) again to confirmsetting, then the Display will show 00:00
and the first 00 will flash, then turn the Tuning Knob (4) to select the correct hours.
4. Press SET button (3) to confirm the alarm setting.
5. Press ALARM button (11) to enter in normal clockmode.
To Next Page
Loading...
Need help?
General
