HOWTO: Propane System
109
© 2014 by Roadtrek, Inc.
Propane Tank Filling
Propane fill valve Propane bleed
To fill the tank, first turn off all propane appliances, then turn off the tank shutoff valve.
We recommend that you find a qualified LPG technician to fill the tank. The following is an outline of the process to help you
understand and not intended to be complete, nor to substitute for formal training or instruction.
Do not attempt to fill the tank unless you have had appropriate training. Reading this manual does not constitute
sufficient training to safely fill propane. If you overfill the tank, propane will vent uncontrollably out of the relief valve.
Attach the fill hose to the fill valve, open the bleeder valve slightly, and fill the tank to 80% capacity. The stop-fill valve should
automatically stop the filling process. You may also see liquid propane spit out of the bleeder valve. Stop filling immediately
and close the bleeder valve.
We recommend that you use only propane from certified LPG retailers.
To Next Page
Loading...
