4. Manual receiving: press and hold 【+】 button to enter RCC signal
receiving.
5. During receiving, press and hold 【+】 button to exit RCC receiving.
*RCC symbol display:
1. When receiving signal , RCC icon will be flashing .
2. When signal successfully received, LCD will display complete RCC
icon and exit RCC receiving.
3. If no signal is received, the RCC icon will disappear.
1. Press and hold【SET】button to enter the SETTING MODE, once in
SETTING MODE the preference you are currently setting will blink on
the screen.
（During setting, only the setting figure will display, other parts will be
invisible.）
2. Adjust the currently flashing item, press【+】or【-】 buttons (press
and hold to fast adjust).
3. Save your adjustments, press and release the【SET】button to adjust
the next preference. (The setting will be automatically save and exitif
there is no operation within 10 seconds.)
4. When the adapter is powered by, Press and hold【SNOOZE/LIGHT】
button to turn on/off the automatic backlight function.
The preference set order is as follows:
LANGUAGE SELECTION
KEY TONE ON/OFF
AUTO DIM TIME SETTING
To Next Page
Loading...