Noted:
(1) . During working, you can take frying tray out,device stop working, and you can
check cooking result or add more food, device continue to work on the program if pull
in the frying tray.no need to start again,very intelligent.
(2) . Power cut or unplug during working, device will stop working, all light off,
device continue to work on the program when power on or plug in again.
(3) . During work, six red lights for heating element, When the six red lights flicker
on by one, it means heating element is working, when the temperature reach setting
temperature, heating element stop working, and six red lights don't flicker.
4、End of program
Heating element stop working when working time is done .show 00 min, motor
continues to work, buzzer warning, motor continues to work 1 min, cooling machine,
then machine enter the standby mode.
Caution:
-Place the appliance on a horizontal, level and stable surface.
-This appliance is intended for normal household use only. It is not applicable in
environments such as staff kitchens, offices, farms or other working surroundings. And
it is no recommended to be used by clients in hotels or other similar environments.
-If the device is used improperly or if it is not used according to the instructions in the
user manual, the warranty becomes invalid and seller refuses any liability for any
damage that may be caused.
-Always unplug the device after use.
-Let the device cool down for about 30 minutes before you handle or clean it.
To Next Page
Loading...