ROBAND HL22 - User Manual

16 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

MANUFACTURED BY

ROBAND AUSTRALIA PTY LTD

OPERATING INSTRUCTIONS

HEAT LAMP ASSEMBLIES

MODELS: HL22, HL24, HL26, HL30, HL90, HL120

& HL150

VERSION 1 UNITS

These instructions cover the models of ROBAND

®

Heat Lamps and Heat Lamp

Assemblies listed above. Although there are slight variances between models,

the installation, operation, care and maintenance procedure is the same for all.

Table of Contents

Questions and Answers

M
Miss Jennifer WilsonAug 5, 2025
What to do if my ROBAND HL22 Heat Lamp Assembly does not function?
- C
  Casey FarrellAug 6, 2025
  If the ROBAND Outdoor Light Heat Lamp Assembly isn't working, first, ensure the machine is correctly plugged in and the power is switched on. Next, check if the power point is working. Finally, verify that the halogen heat lamp hasn't failed.

ROBAND HL22 Specifications

General

IP Rating	IP65
Beam Angle	120°
Input Voltage	AC220-240V
Lifespan	50000 hours
Material	Aluminum