EasyManua.ls Logo

Robaux 3PT - Installation

Robaux 3PT
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bienvenue
dans le tripot!
The Robaux 3PT is a multimode three-channel control voltage
generator.
The handy knob with the triple ring-shaped voltage indicator makes
the eurorack module the ideal performance tool.
The Tripot has three control voltage channels which can be adjus-
ted with three parameter trimmers. Instead of using the big knob,
the device can also be controlled via the CV input.
The module offers seven different modes. These include a
performance tool, LFO, chord generator, random generator,
quantizer, Baby8 or Euclidean rhythm sequencer.
The 3PT does not claim to replace complex LFOs, sophisticated
quantizers or sequencers. The Tripot is a toy and a tool at the same
time. It‘s just nice to have such a rich set of modes in one module.
The modes can be switched by pressing the mode button a in the
top right. The ring-shaped display shows which mode has been
selected.
Installation
The Robaux 3PT requires a ±12V power supply (2x5-pin connec-
tor). The red strip of the ribbon cable (-12V side) must be oriented
on the same side as the «Red Stripe» mark on the board. The
module draws about 20mA from the +12V rail.

Other manuals for Robaux 3PT