EasyManua.ls Logo

Roberts 10-56 - User Manual

Roberts 10-56
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LONGNECK PLUS 6”Jamb Saw
OWNER’S MANUAL
Scie de jambage de 150mm
MANUEL D’UTILISATION
Sierra de 150mm para recortar jambas
MANUAL DE OPERACIÓN
WARNING Read and understand all instructions. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
bodily injury. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AVERTISSEMENT Lire et comprendre toutes les directives. Le
non-respect des directives décrites ci-dessous peut causer des chocs
électriques, un incendie ou des blessures graves. VEUILLEZ CONSERVER
CES DIRECTIVES POUR RÉFÉRENCE ULTÉRIEURE.
ADVERTENCIA Lea y comprenda todas las instrucciones. Si no se
cumplen todas las instrucciones enumeradas a continuación se
puede producir choque eléctrico, incendio y/o lesiones físicas graves.
CONSERVE ESTAS INSTRUCCIONES PARA CONSULTARLAS EN EL FUTURO
Double insulated
Double isolement
Doble aislamiento
10-56
Question and Answer IconNeed help?

Do you have a question about the Roberts 10-56 and is the answer not in the manual?

Summary

General Safety Information

Important Safety Warnings

Read and understand all instructions to prevent electric shock, fire, and serious bodily injury. Save for future reference.

Maintenance and Product Warnings

Product Specific Safety Warnings

Use the saw only for stated purposes, never operate freehand, wear eye protection and gloves.

Assembly and Blade Changing

Blade Installation

Ensure the saw is unplugged, insert blade clamp, ensure blade teeth face counterclockwise, and tighten the screw.

Operating Instructions

Preparation for Operation

Read safety instructions, ensure saw is unplugged, guards and handle are attached, and wear goggles.

Cutting Setup and Adjustment

Check for hazards, determine cut depth, draw scribe line, set skirt height, and check parallelism.

Depth Adjustment

Set depth guide to just clear the jamb or molding to avoid damage and excessive dust.

Saw Operation

Plug in the saw, place it on the floor, grasp firmly, and move parallel to the floor to cut the jamb.

Roberts 10-56 Specifications

General IconGeneral
BrandRoberts
Model10-56
CategoryPower Tool
LanguageEnglish

Related product manuals