Robic SC-606 - User Manual

Page 1 of 8
Rev 02 05/04/05
SC-606 Instructions
SC-606
Thank you for buying the Robic SC-606. Your purchase brings you a world class timer with a vast array of
advanced timekeeping functions.
Please take a few moments to review this operating guide, so that you may become familiar with the SC-
606’s many capabilities and how you can best access them for your maximum benefit.
PART I
PUSHBUTTON and INDICATOR LOCATION
The following illustration details the location of pushbuttons and indicators for setting and operating the
SC-606.
The indicators in this illustration will appear only when a particular mode or function is activated by
pressing a pushbutton.
Once you are familiar with the SC-606’s operation, you will be ready to enjoy its many functions. The
starting point for any operation is the NORMAL TIME mode. You may sequence through the modes by
pressing “E”.
NORMAL TIME
¾ Time of Day in Hours, Minutes and Seconds
¾ Calendar with Day, Month and Date
¾ AM/PM or 24 Hour Time Options
¾ Daily Alarm and Hourly Chime
CHRONOGRAPH (Stopwatch)
Three (3) Timing Options
(1) Lap Time Chronograph
Pushbutton “A”
START/STOP
Indicators:
UP, DOWN, AVG, MAX, SET
Indicators:
CHRONO, LAP/SPL, RUN, STOP, RCL, ♠, (((•)))
Pushbutton “C”
ADVANCE/RELEASE, Alarm/Chime On/Off
Pushbutton “E”
MODE/NEXT
Pushbutton “F”
MEMORY RECALL/SET
Pushbutton “D”
AVG/MAXIMUM
Alarm Time Display
Pushbutton “B”
LAP •SPLIT/RESET

Summary

Pushbutton and Indicator Location

Normal Time Operation

Time of Day and Calendar Display

Displays current time, day, month, and date.

Alarm Time Display and Setting

Shows the set alarm time and guide to setting clock and alarm.

Chronograph Mode Operations

Chronograph Modes and General Operation

Details timing options (LAP, SPLIT) and basic controls.

Memory Recall and Lap;Split Timing

Accessing stored readings and operating LAP/SPLIT modes.

Lap and Split Chronograph Procedures

Specific instructions for timing single events and multiple laps/splits.

Lap;Split Chronograph Operation

Guide to dual split timing and its specific features.

Countdown Timer Operations

Countdown Timer Modes

Explains the three distinct modes: STOP, REPEAT, and COUNT UP.

Setting and Operating the Countdown Timer

Procedure for configuring presets and managing timer execution.

Limited Warranty and Product Care

Warranty Coverage and Process

Details covered defects, required proof, and the repair process.

Warranty Exclusions and Limitations

Lists conditions, damages, and rights not covered by the warranty.

Product Care and Service

Recommendations for maintenance and procedures for factory service.

Robic SC-606 Specifications

General

Brand	Robic
Model	SC-606
Category	Watch
Language	English