Need help?Do you have a question about the Robin NB2001 and is the answer not in the manual?
General| Brand | Robin |
|---|---|
| Model | NB2001 |
| Category | Brush Cutter |
| Language | English |
Read manual carefully before operation and observe safety regulations. Preserve manual.
Symbols related to operation, warnings, and safety procedures.
Symbols indicating required personal protective equipment.
Symbols related to engine start, stop, and fuel.
General guidelines for safe operation of the brush cutter.
Details required protective gear for safe operation.
Instructions on how to safely start the brush cutter.
Detailed safety instructions for handling fuel.
Specifies the correct fuel and oil mix ratio.
Step-by-step guide for refueling the engine safely.
Guidelines for safe storage of fuel.
Explanation of kickback and when it may occur.
Methods and techniques to prevent dangerous kickbacks.
Information on selecting and using appropriate cutting tools.
Guidelines for routine maintenance of the brush cutter.
Instruction to ensure a first-aid box is available and maintained.
Details on engine displacement, performance, and speed.
Information on fuel, idle speed, and clutch engagement.
Details on carburetor, ignition, spark plug, and gear ratio.
Identification of key parts like tank, starter, handle, and shaft.
Identification of control levers, cables, and gear cases.
Identification of cutting heads and protective guards.
Specific instructions for mounting the loop handle.
Emphasizes using authentic ROBIN cutting accessories.
Instructions for mounting blades/heads on NB2001 models.
Procedure for mounting cutter blades with hex wrench.
Safety note about wearing gloves when handling blades.
Note on components not needed for nylon head mounting.
Detailed safety instructions for handling fuel.
Specifies the correct fuel and oil mix ratio.
Step-by-step guide for refueling the engine safely.
Guidelines for safe storage of fuel.
Instructions for attaching and detaching the shoulder strap.
Step-by-step guide for starting the engine.
Steps to safely stop the engine.
Warnings regarding engine RPM limits during operation.
Procedure for starting a warm engine.
Steps to safely stop the engine.
Procedure to check and adjust the engine's idle speed.
Warning against self-resharpening cutting tools.
How to operate the nylon cutting head effectively.
Troubleshooting steps if the nylon cord fails to feed.
Safety precautions before performing any servicing.
Regular checks and maintenance tasks to be done daily.
Specific tasks to perform after each day's use.
Instructions for cleaning the air cleaner component.
Safety warning regarding the spark plug connector.
Procedure for lubricating the gear case with grease.
Recommends regular inspection of the fuel tank's suction filter.
Instruction to regularly check the muffler's exhaust port.
Steps for draining fuel and preparing for storage.
Overview of maintenance intervals and tasks.
Diagnosing and resolving engine starting and performance issues.
Details owner's rights and responsibilities regarding warranty.
Outlines what the manufacturer's warranty covers.
Lists the owner's duties for maintaining warranty coverage.
Specifies when the warranty period begins.
Defines the duration of the warranty coverage.
Details the specific parts and services covered by the warranty.
Information on obtaining repair or replacement parts under warranty.
Clarifies the warranty period for different types of parts.
Explains warranty coverage for diagnostic labor.
Addresses warranty coverage for consequential damages.
Exclusions from warranty coverage due to improper use or maintenance.
Warranty exclusion for modified or aftermarket parts.
Clarifies that certain expenses are not covered by the warranty.
Procedure for filing a warranty claim for repairs.
Requirement to use approved parts for emission-related maintenance.
Lists components of the fuel metering system covered by warranty.
Lists components of the ignition system covered by warranty.
Other miscellaneous parts covered by the warranty.
Owner's responsibility for performing scheduled maintenance.
Overview of scheduled maintenance intervals.
Details the scope of the federal emission warranty coverage.
Specifies the duration of the emission component warranty.
Lists parts covered under the emission component defect warranty.
How to access authorized warranty service.
Specific conditions that void the warranty.
Maintenance parts are not covered by this warranty.
Consequential damages are excluded from coverage.
Charges for non-warranty work are not covered.
Warranty void if non-authorized parts are used.
Owner's responsibility to perform required maintenance.
Conditions under which warranty coverage may be denied.
Responsibility to present the engine for service when issues arise.
Owner's responsibility for maintenance and record-keeping.
Warranty repairs must be done by authorized centers.
Using equivalent parts for emission control requires self-assurance of quality.
Process for making a warranty claim for repairs.
Lists components of the brush cutter's main body.
Details components of the control lever assembly.
Lists components related to the engine body.
Details parts for the carburetor and air cleaner systems.
Lists parts included as standard accessories.
Details how and where to obtain warranty service.
Lists examples of parts and services excluded from warranty coverage.
Outlines the owner's responsibilities for maintaining the product.
Section for warranty registration form.
To Next Page