Overview
Contents of packaging:
1. Plug with brush
(spare gasket supplied in bag)
2. Sink Flange
3. Rubber gasket
4. Fibre gasket
5. Mounting ring
6. Hinged clamp
7. Splash baffle
8. Rubber gasket
9. Waste pipe (2 x screws)
10. Wrench
11. Main body
Air Switch option not shown.
Air switch and plastic tubing not shown.
Pre-installation
Important:
Before you start to install your Robinhood Waste disposal please read through the entire instruction manual
thoroughly. The set of instructions provided is general: local building codes take precedence over the instructions
in this guide and your installation must conform to the building codes in your area. Be sure to retain this set of
instructions for future reference.
Typical equipment required:
1. Philips and flat blade screwdrivers
2. Hammer
3. Channel lock pliers, slip joint
4. Screwdriver
5. Adjustable pipe wrench
Materials & Accessories
1. Petroleum jelly, liquid soap or cooking oil
2. Hose clamp (optional)
3. Dishwasher drain connector (optional)
To Next Page
Loading...