3
Safety and maintenance instructions
Woodworking is a pleasant job that will give you a lot of satisfaction.
Nevertheless, working with a machine requires constant attention and care. Therefore, for your own
safety, pay attention to the instructions summarised in this chapter.
- The machine can only be used safely if the operator strictly follows the operating and safety
instructions.
- It is absolutely essential to read this manual before using the machine so you know how to
the machine works and what its limitations are.
- Always make sure that all safety devices are fitted to the machine and that the machine is connected
to a dust extraction system.
- Provide sufficient space arround the machine and a good lighting of the workshop.
- When changing tools or when doing a maintenance job, the machine must always be disconnected
from its power supply.
- Knives and tools which are not correctly sharpened, or are in a bad shape, not only diminish
the quality of the work, but also increase the risk of accidents.
- Always wear suitable clothing, loose or torn clothes are very dangerous.
- Keep children away from the machine and out of the workshop.
- To avoid damaging your hearing we recommend to wear ear protection, when working
with the machine.
Danger list
The danger list is based on parts 1 and 2 of EN 290 and annexe A of part 2.
To Next Page
Loading...
