Robland NZ 3200 - AXIS ERGO User Manual

NZ 3200
NZ AXIS ERGO
Manual
Betriebsanleitung

Robland NZ 3200 - AXIS ERGO Specifications

General

Brand	Robland
Model	NZ 3200 - AXIS ERGO
Category	Cutter
Language	English

Summary

Safety and Maintenance Instructions

Danger List

Lists potential hazards and dangers associated with operating the machine.

Operating Instructions

Training of Machine Users

Essential training aspects for operators using the machine safely and correctly.

Stability

Adjustment and Installation

Guidance on adjusting and installing machine components and tools.

Handling of Tools

Normal and Prohibited Use

Technical Data

Electrical Connection

Mounting on the Sliding Table

Starting up the Machine

Changing Main Sawblade and Scorer Sawblade

Use and Adjustment of the Riving Knife

Protection During Sawblade Changing

Adjusting the Main Sawblade and Scorer Sawblade

Adjusting Height

Adjusting the Inclination of the Saw Unit

Alignment of Scorer Blade According to the Main Sawblade

Blocking the Sliding Table

Cleaning and Maintenance of the Sliding Table

Adjusting the Cross-Cut Fence

Use of the Parallel Fence

Calibration of the Scale on the Parallel Fence

Using the Sawguard

Belt Tension and Speed Changing

Maintenance of the Machine

Problems: Causes and Solutions

Option A5216: Retro-fit Digital Read-out for Parallel Fence

Mounting Instructions for Panelsaw Z Serie

Option A5218: Digital Flip Stop on the Cross-Cut Fence

Manual Axis-Ergo

References and Positioning

Calibration of the Guide