Robo-Plus V2
OPERATING INSTRUCTIONS – April 2023
Firstly, thank you for choosing a Robo-Tek Pool Cleaner, and welcome to our family.
At Robo-Tek we put ourselves in your position……and we don’t like reading user
guides either !
Please take 3 mins to read through these brief instructions to ensure trouble free use,
and maximise the life span of your purchase.
What’s in the Boxes?
Box 1
• Partly assembled Caddy cart.
• Box of screws and bolts.
Box 2
• 1 x Robo-Tek Robot
• 1 x Control box
• 2 Filter bags – (1x 70 Micron filter bag already fitted to the base plate and 1 x 20
micron filter bag for fine dust)
• 1 x remote control – (Battery already fitted)
• 1 x Impeller cover
EASY SET UP - Box 1
• Undo the Caddy Box
• Follow the instructions in the caddy box to assemble the caddy. (5 mins)
• You will have 2 long screws left over (for the control box)
• Place the caddy cart close by, we will need it again shortly
EASY SET UP - Box 2
• Remove the Control box, Remote control, extra Filter bag
from the box.
• Remove the robot from the box.
• Cut the cable tie off the floating cable.
• Attach the Control box to the Caddy, using the 4 long screws left
over from the Caddy Cart assembly.
• Place the robot on the caddy, and wheel to the pool.
To Next Page
General