The Robocura Smart Knee is an intelligent knee massager designed for home use, offering a blend of innovative features and user-friendly operation to promote wellness through robotic massage.
Function Description:
The Smart Knee massager provides an Omni-directional massage, primarily focusing on knee massage but also capable of assisting with leg and arm massage. It incorporates multiple massage programs that combine heating, vibration, and air pressure to deliver a comprehensive therapeutic experience. The device is designed to reduce pressure on the entire leg, especially the knee, improve muscle flexibility, promote blood circulation, and alleviate overall physical and mental fatigue, ultimately contributing to improved sleep quality.
Important Technical Specifications:
- Model: Smart Knee
- Net Weight (NW): 3.5 KG
- Input: 100-240V~
- Rated Frequency: 50/60Hz
- Output: 12.6V, 1.5A, 20W
- Default Operation Time: 15 minutes
- Dimension Size: 515 x 235 x 240 MM
- Battery: 1200 mAh high-quality lithium battery, allowing for approximately 6 uses per charge.
- Heating Temperature: Approximately 40-50 degrees Celsius for the initial heating program, and 45-55 degrees Celsius for the second heating program.
Usage Features:
The Smart Knee is designed for ease of use with intuitive controls:
- Power Supply: The device can be used wirelessly after charging. When the charger is plugged in, a green indicator light signifies proper charging. A red light indicates low battery or active charging, while a green light confirms a full charge. The product is not recommended for continuous plug-in use to preserve battery life.
- Shutdown Button: This button initiates the automatic program. The blue light indicates heating is on and vibration is automatically programmed, with vibration as the primary mode and air pressure as auxiliary. Pressing it again activates the second automatic program (red light), where heating and vibration are on, air pressure is primary, and vibration is auxiliary. A third press closes the program.
- Vibration Button: After power-on, pressing this button activates the vibration mode (blue light). Pressing it again initiates the shutdown function.
- Heating Button: After power-on, pressing this button activates the heating program (blue light), setting the temperature to 40-50 degrees Celsius. Pressing it again activates a second heating program (red light) with a temperature of 45-55 degrees Celsius.
- Low Battery Indicator: When the battery is low, the three button lights on the machine will flash, signaling the need for charging.
- Automatic Shut-off: The machine automatically turns off after 15 minutes of operation.
- Safety Precautions:
- Always read the manual and safety cautions before use.
- Do not use while sleeping or if drowsy, or with swollen/inflamed feet or skin eruptions.
- Avoid use on insensitive skin or by individuals with poor blood circulation.
- Stop operation immediately if discomfort occurs.
- Be cautious of the hot surface, especially if sensitive to heat.
- Do not use with other therapeutic equipment or electric blankets.
- Use only for its intended purpose and with manufacturer-recommended attachments.
- Avoid use after taking pain killers, sedatives, or alcohol.
- Children should be supervised and prevented from playing with the product.
- Do not carry the unit by its supply cord or use the cord as a handle.
- Keep the unit away from heat sources.
- Never operate with blocked air openings.
- Do not drop or insert objects into openings.
- Do not operate with a damaged cord or plug, or if it's not working properly.
- Not for outdoor use.
- Always turn off controls and unplug before disconnecting.
- Do not operate where aerosol products or oxygen are being administered.
- Do not stand in the unit; use while seated.
- Unplug immediately if submerged in water.
- Do not apply excessive force to switches or controls.
- Connect to the specified power supply type.
- Ensure grounding/polarization means are not defeated.
- Do not attempt to service the unit beyond instructions.
- Clean only as recommended.
- Avoid chemical solvents for cleaning.
- Keep the cord away from heated surfaces.
- Store in a dry place, away from direct sunlight, and on a carpet to minimize noise.
- Store in a safe place away from children to prevent damage or injury.
- The appliance has a polarized plug; if it doesn't fit, reverse it. Do not modify the plug.
Maintenance Features:
- Storage:
- Store in the packing carton in a safe, dry, well-ventilated, and shaded place.
- Do not twist the power plug or hang the power wire.
- Avoid sharp items that could damage the product surface.
- Do not store under direct sunlight or in high temperatures.
- Cleaning:
- Before cleaning, ensure the power cord is unplugged and the machine is completely cool.
- Use a damp cloth to clean the product, ensuring it is completely dry before reuse.
- The detachable fabric cloth can be washed normally.
- Do not use benzene, thinner, or other corrosive detergents.
- General Maintenance:
- Keep the product clean and store in a dry environment.
- When not in use for a long time, cover it with a dustproof cover.
- Troubleshooting:
- If the machine doesn't operate when plugged in, check the power cord and plug connection.
- If the machine stops operating after a long period due to high temperature, it enters a protection state. Turn off the power and suspend use for 30-50 minutes.
- If the control panel cannot be operated during use, check if the automatic timing has expired. Press the button to operate or turn off and restart the machine.
Warranty Policy:
- The warranty is for manufacturing defects and is valid for one year from the date of purchase.
- Repair service is only for goods purchased from an authorized dealer.
- Proof of purchase (original receipt) is required for maintenance service.
- Damage caused by misuse, improper handling, or unauthorized modification/repair is not covered.
- The warranty does not cover attachments not part of the product itself.
- It does not apply to leases, commercial, institutional, or other non-residential users.
- Repair charges must be authorized by the technician.
- If repair components are out of stock, Robocura has the right to repair with optional components.
- The warranty excludes consequential damage/defects from improper installation/use.
- A duly filled and stamped warranty card with the original invoice is prerequisite for warranty claims.
- All disputes are subject to Delhi jurisdiction.
Need help?
To Next Page
General