EasyManua.ls Logo

ROBOOTER E40 - Maintenance & Troubleshooting; Routine Maintenance and Inspection

ROBOOTER E40
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
4.7 Switch to Pushing Mode
press at the same
time
Entering Pushing Mode: Press both the '︿' key and '﹀' key simultaneously to enter the
pushing mode.
Exiting Pushing Mode: Shake the rocker to exit from pushing mode. (Refer to Figure 4.7
for guidance).
Figure 4.7
4. Using the Electric Wheelchair
4.8 Charging
Figure 4.8.1
Charging Method I:
Connect the charger.
Insert the charger plug into the
upper controller for charging.
Refer to Figure 4.8.1 for a visual
guide.
Figure 4.8.2
Charging Method II:
Remove the battery.
Plug the charger plug into the
battery's charging port.
Refer to Figure 4.8.2 for a visual
guide.