08
Insp
ect Electrical Connections: Always check all electrical connections to ensure
safety and reliability before use.
Wiring Modifications: Do not disconnect, alter, or modify any installed wiring
harness components on the electric wheelchair.
Battery Specifications: Use only specifiedbatteries for the wheelchair. Avoid
unqualified batteries such as non-recyclable lead-acid types or batteries from other
manufacturers.
Battery Information: Before any installation, thoroughly read all details related to
batteries and their chargers.
Seat Precautions: The electric wheelchair is not designed to be secured as a seat in
a moving vehicle.
FCC Compliance: This device is in line with Part 15 of the FCC Rules, which
mandates:
The device should not cause harmful interference.
The device must accept any interference received, inclusive of interference
that may lead to undesired operation.
Class B Device: This equipment conforms to the limits for a Class B digital device,
according to Part 15 of the FCC Rules. These parameters are set to provide a
reasonable safeguard against harmful interference within residential installations.
However, note that:
If interference with radio or TV reception occurs (which you can ascertain by
turning the equipment on and off), take corrective measures such as:
• Reorienting or relocating the receiving antenna.
• Increasing the separation between the device and the receiver.
• Plugging the equipment into a different circuit from the receiver.
For advanced troubleshooting, it's recommended to consult your dealer
Non-compliance: Not adhering to the above-stated guidelines could lead to
unforeseen damages to the equipment or surroundings.
1. Safety
To Next Page
Loading...