To Next PageTo Next Page
Need help?Do you have a question about the Robot Pumps BW Series and is the answer not in the manual?
Displays warning symbols and their meanings.
Provides essential safety guidelines for pump operation.
Covers disposal of parts and environmental regulations.
Describes the BW- and BD-pumps' design and applications.
Illustrates and lists the main components of the pumps.
Details sound levels for BW and BD pumps at different speeds.
Instructions for checking pump delivery for damage or completeness.
Guidance on checking the oil level in the oiltank.
Checks for correct line voltage and frequency connection.
Explains the importance of motor protection circuitbreakers.
Procedure for megger testing motor windings.
Method to loosen sticking mechanical seal surfaces.
Check for delivered installation components.
Explains how to check the correct direction of rotation.
Procedure for checking motor current during operation.
Advises on adjusting levels to limit start frequency.
Lists possible installation configurations for BW/BD pumps.
Details horizontal installation on a base plate.
Procedure for checking and correcting shaft alignment.
Describes vertical installation on a support.
Covers short-coupled horizontal or vertical installations.
Details V-belt driven installation with a high-placed motor.
Explains how to check and adjust V-belt tension.
Provides limits for forces and moments on flanges.
General safety and cleaning instructions for maintenance.
Outlines recommended maintenance intervals and checks.
Specifies lubricants for bearings and oil reservoir.
Instructions for checking the oil level in the oiltank.
Procedure and advice for changing the oil.
Explains the function of flexible couplings and their relevance.
Procedure for installing and checking flexible couplings for version -H.
Steps for renewing the flexible coupling for version -H.
Procedure for installing and checking flexible couplings for version -V.
Steps for renewing the flexible coupling for version -V.
Describes the optional seal flushing connection and its function.
Safety precautions to take during troubleshooting.
A list of problems, causes, required actions, and checkpoints.
Explains the pump dataplate and its information.
Shows an electrical connection diagram for direct-on-line start.
Shows an electrical connection diagram for star-delta start.
A blank section for user notes and remarks.
General| Brand | Robot Pumps |
|---|---|
| Model | BW Series |
| Category | Water Pump |
| Language | English |
