Need help?Do you have a question about the Robur GA Line ACF Series and is the answer not in the manual?
Lists documentation for Direct Digital Controller (DDC) connection.
Defines terms like Appliance, DDC, CAT and explains manual icons.
Details safety precautions, hazards, and warnings for operation.
Covers CE standards, conformity, and regulatory references for installation.
Explains the chiller's absorption cycle, power, and available versions.
Provides detailed technical data, operational characteristics, and electrical specifications.
Shows unit dimensions and layout of service panels for various versions.
Details the procedure for starting and stopping the ACF unit.
Explains the S61 electronic circuit board, its display, and menu structure.
Guides on configuring operating parameters and their importance.
Explains how to reset errors and the flame control unit via menu 2.
Lists and explains warning ('u') and error ('E') codes displayed by the unit.
Provides instructions for shutdown and start-up after extended periods.
Outlines general rules, safety, and qualified personnel requirements for installation.
Details placement, lifting, and clearance requirements for the unit.
Covers piping materials, insulation, antifreeze, and water quality parameters.
Explains gas pressure requirements, pipe connections, and LPG conversion.
Details the process of filling the water circuit with antifreeze.
Guides on configuring hydraulic parameters via the circuit board's menu.
Explains how to control the ACF using a switch or thermostat.
Details pump control methods based on pump power draw and circuit board.
Provides wiring diagrams for pump and electrical connections.
Explains connecting and configuring the DDC via CAN BUS network.
Describes how to remotely reset the flame controller using a button.
Covers initial startup procedures, gas flow adjustment, and checks.
Details the procedure for converting the appliance to different gas types.
Explains routine maintenance operations for the end user, like coil cleaning.
Lists and explains warning and error codes displayed by the unit's board.
States compliance with EC directives and relevant standards.
To Next Page
General