To Next PageTo Next Page
Need help?Do you have a question about the Robus RPR180PIR-01 and is the answer not in the manual?
Lists technical details including operating temperature, voltage, load ratings, mounting height, and detection range.
Provides a step-by-step guide for mounting the sensor, introducing cables, connecting wires, and adjusting settings.
Explains walk testing, adjusting Lux level for activation, and setting the time delay for the light.
Details how to use the manual override to keep the light on for 8 hours or revert to AUTO mode.
The ROBUS PROTON 180 DEGREE IP54 PIR is a motion sensor designed for outdoor use, offering a range of features for automated lighting control. It comes in two models, RPR180PIR-01 and RPR180PIR-04, and includes an accessory shield to reduce the detection angle, enhancing its versatility.
The primary function of the ROBUS PROTON PIR is to detect movement within its specified range and activate a connected load, typically lighting. This automation helps in energy saving by ensuring lights are only on when needed. The sensor operates by detecting infrared radiation emitted by moving objects, such as people or animals. Once movement is detected, it triggers the connected lights for a user-defined duration.
The device incorporates a "Lux Level Adjustment" feature, allowing users to control at what ambient light level the sensor becomes active. This means the sensor can be set to only activate lights during nighttime hours, or to operate continuously day and night, depending on the user's preference. For instance, setting the Lux control towards the "Sun" position (Max) enables activation regardless of ambient light, while a lower Lux setting (e.g., 3 Lux) ensures activation only when it's dark.
A "Time Delay" function is also integrated, which determines how long the connected load remains "on" after activation. This duration is adjustable, providing flexibility to suit different applications and user needs. Once the set time elapses and no further movement is detected, the lights will switch off automatically. If continuous movement is detected, the timing period restarts from the beginning, ensuring the lights remain on as long as there is activity within the detection zone.
The ROBUS PROTON PIR also features a "Manual Override Function," which allows the user to bypass the automatic motion detection and keep the connected lights on permanently for a set period. This is particularly useful for situations where continuous illumination is required, such as during extended outdoor activities. The override is activated through a specific sequence of "Off/On" operations using a standard wall switch, and it typically keeps the lights on for 8 hours. To revert to the automatic detection mode, the user simply turns the sensor off, and the light will then turn off, returning to its normal motion-sensing operation.
The accessory shield included with the device serves to reduce the detection angle, which can be beneficial in specific installations. For example, if the sensor is placed near a busy street or an area where unwanted triggers might occur, the shield can narrow the field of view, preventing false activations and focusing detection on the desired area.
Installation of the ROBUS PROTON PIR involves several steps to ensure proper functionality and safety. Users are advised to first ensure the mains supply is switched off before commencing any work. Selecting a suitable location for mounting the sensor is crucial for optimal performance, considering its detection range and angle. The device is designed for wall mounting, and the back plate needs to be removed to access the fixing holes and wiring terminals.
Cables are introduced into the unit, and appropriate fixing hole positions are marked on the wall. Before drilling, it is essential to check for buried cables, pipes, and other building services to prevent damage. The back plate is then securely attached to the wall using the provided screws. For corner mounting, specific instructions and diagrams are provided to guide the user.
Wiring connections are straightforward, with clear indications for Live In (Brown) to L, Live Out (Brown) to L', and Neutrals to N. Once wired, the sensor unit is attached to the back plate, ensuring it is secure. Finally, the angle of the sensor and its settings (Lux and Time Delay) can be adjusted to fine-tune its operation.
To test the detection area and settings, a "walk test" can be performed. During this test, the Lux control is set to the "Sun" position (Max) and the Time Delay to a short duration (e.g., 10 seconds). The user then walks through the intended detection area at a slow pace. Each time movement is detected, the load will switch on, confirming the sensor's coverage. After the walk test, the Lux and Time Delay controls can be adjusted to the desired operational levels.
The Lux control dial allows for precise adjustment of the ambient light threshold. Rotating the dial towards the "Sun" icon (2000 Lux) means the sensor will activate the lights both during the day and at night when movement is detected. Conversely, rotating it towards the "Moon" icon (3 Lux) will restrict activation to nighttime only, ensuring lights are not unnecessarily turned on during daylight hours.
The Time Delay dial enables users to set the duration for which the lights remain on after motion detection. This can range from a few seconds to several minutes, allowing for customization based on the specific application, such as a short delay for a pathway or a longer delay for a frequently used entrance.
The ROBUS PROTON PIR is designed for durability and minimal maintenance, with an IP54 rating indicating protection against dust ingress and splashing water, making it suitable for outdoor environments. However, like all electrical products, it is important to handle it with care.
Regular visual inspection of the sensor and its mounting can help identify any potential issues, such as loose connections or physical damage. The accessory shield, if used, should also be checked periodically to ensure it remains securely in place and is not obstructing the sensor's view in an unintended way.
Cleaning the sensor's lens gently with a soft, damp cloth can help maintain its detection sensitivity, as accumulated dust or dirt might impair its ability to detect movement effectively. It is crucial to avoid using abrasive cleaners or solvents, which could damage the plastic components or the lens.
In case of any malfunction or uncertainty regarding the device's operation or installation, users are advised to consult a competent electrician. This ensures that any troubleshooting or repairs are carried out safely and correctly, preventing potential hazards or further damage to the product or electrical system. The product's technical information and specifications may change over time, so referring to the manufacturer's website for the latest updates is recommended for maintenance and support purposes.
General| Model | RPR180PIR-01 |
|---|---|
| Brand | Robus |
| Detection Range | 12m |
| Detection Angle | 180° |
| IP Rating | IP44 |
| Operating Temperature | -20°C to +40°C |
| Material | Plastic |
| Color | White |
| Product Type | PIR Motion Sensor |
| Mounting | Wall Mounted |
