To Next PageTo Next Page
Need help?Do you have a question about the Robuschi RBS 45 AV and is the answer not in the manual?
General| Type | Rotary Lobe Blower |
|---|---|
| Nominal size | 45 |
| Maximum pressure | 1000 mbar |
| Power | Up to 11 kW |
| Speed | Up to 4000 rpm |
| Maximum vacuum | -500 mbar |
| Noise Level | 75-85 dB(A) (depending on operating conditions) |
Explains how the RBS-AV series blowers work using two conjugate rotors.
Details the blower's body, covers, seals, bearings, synchronised gears, and sumps.
Specifies conditions for blower operation, excluding explosive, corrosive, or toxic gases.
Provides tables for theoretical blower speed, motor power, and temperature limits.
Describes methods for adjusting blower flow rate, emphasizing safe practices.
Lists prohibited operations, associated risks (fire, explosion, damage), and necessary safety measures.
Identifies hazards like entanglement, fluid ejection, thermal contact, noise, and fire/explosion risks.
Emphasizes that electrical connections must be done by authorized specialists, following regulations and safety.
Lists pre-operation checks including preservation state, alignment, free rotation, safety devices, and oil filling.
Outlines the procedure for the first start-up, including valve operation, rotation check, and cooling.
Provides the correct procedure for stopping the blower, including closing valves, cooling circuit, and forevacuum system.
Details the first oil change timing and subsequent changes, including oil quantity for different sizes and types.
Provides a table of operating problems, their causes, solutions, and references to relevant sections.
