Hardware Installation Quick Guide
R2000--Industrial Dual SIM Cellular VPN Router
Before installing R2000 router, verify that the package contains the following items:
1 x Robustel R2000 Industrial Dual SIM Cellular VPN Router
1 x Terminal block for power
1 x Quick Start Guide with download link of other documents or tools
Optional accessories (sold separately)
AC/DC power adapter
SMA cellular antenna (HSPA+/LTE)
Stubby/magnet RP-SMA Wi-Fi antenna
Wall mounting kit
35 mm DIN rail mounting kit
*Contact your sales representative if any of the above items is missing or damaged*
Environmental Requirements
Power input:
9 to 26V DC (
A014401, A014402, A014403, A014404, A014405, A014406, A014701, A014702,
A014703, A014704, A014705, A014706);
9 to 36V DC
Power consumption: Idle: 100 mA @ 12 V, Data Link: 500 mA (peak) @ 12 V
Operating temperature: -20 to 65°C
Operating humidity: 5 to 95% RH
As shown in the following figures, R2000 router has two Ethernet ports (2 x LAN or 1 x LAN + 1 x WAN)
and two cellular SIM card slots.
Reset Button
Restore the R2000 to factory default settings by using a pointed object (such as a Pointed pen) to keep
pushing the button about 16 seconds once power on, until all the LED light blink one by one recurrently.
When all the LED light blinks hold on 2 seconds, it means that the router loads default successfully.
In addition, reboot R2000 by pushing the button for 2~7 seconds under working status.
Ethernet Port
Each Ethernet port has two LED indicators. The yellow one is Link indicator and the green one doesn’t
mean anything. There are three status of Link indicator.
Data is being transmitted
Router shall be grounding reliably
under the rule which in order to
avoid lightning strike damage.
When use the power adapter, please
note the power polarity.
Please pay attention to waterproof in
the storage, transportation and
Suggest to mounting the router on a
horizontal flat surface.
If warranty label was damaged in
warranty period of product, no free