Do you have a question about the Roca R-30/30 and is the answer not in the manual?
Boiler output and pressure limits for central heating.
Boiler output and pressure limits for domestic hot water.
Description of buttons on the control panel.
Explanation of symbols displayed on the boiler screen.
Meaning of the indicator lights on the boiler.
Setting the boiler for combined heating and hot water.
Setting the boiler for domestic hot water only.
Canceling programmed service and activating frost protection.
How to adjust the central heating temperature settings.
How to adjust domestic hot water temperature settings.
What to do when the red indicator lamp lights up due to a fault.
Checks for specific fault codes like 03, 06, 07, 12, 14, 15, 17.
Automatic pump activation to prevent seizure.
Pump continues running after cycles to prevent inertia.
Pump activates when heating circuit temperature drops to 7°C.
Activates pump and ignition at minimum output for extreme cold.
Advice to remove the protective film from the control panel.
Recommendations for professional start-up, adjustments, and checks.
Procedure to isolate and empty the boiler if no electrical supply.
Boiler specifications for heating.
Boiler specifications for domestic hot water.
Description of the control panel push buttons.
Explanation of screen symbols.
List and explanation of fault codes.
Meaning of the indicator lights.