Page | 7
Basic Operation
Power and Volume
Power control:
Press the [POWER] button to turn the power on and again to turn the power off.
Adjustment of the Master Volume:
The keyboard has 10 levels of volume from 1 -10. The default volume level when powered on is
set to level 8. To change the volume, press the [MASTER VOLUME +/-] buttons. The volume level is
indicated by the bars on the LCD display. Pressing both the [MASTER VOLUME +/-] buttons at the same
time will make the master volume return to the default level.
Tone
Tone Selection:
When the keyboard is first switched on the default status is TONE. To change the tone you can
either press the + or - buttons on the numerical keypad or directly input the number of the tone you require
by pressing the corresponding digits 0-9.