Need help?Do you have a question about the rock space RSD0613 and is the answer not in the manual?
This document describes the rock space Whole Home Mesh WiFi System, model RSD0613 (3-pack), a device designed to provide comprehensive WiFi coverage throughout a home.
The rock space Whole Home Mesh WiFi System is a networking solution that creates a unified WiFi network using multiple interconnected nodes. This system aims to eliminate WiFi dead zones and provide seamless internet access across an entire home. One node functions as the primary node, connecting directly to the internet source (modem or Ethernet jack), while the others act as secondary nodes, extending the network's reach. The system supports both wired and wireless connections for devices.
Model: RSD0613 (3-pack) Power Input: 12V 1.5A Ethernet Ports: 10/100/1000Mbps WAN/LAN port, 10/100/1000Mbps LAN ports (2 per node) WiFi Standard: AC2100 Tri-band Whole Home Mesh WiFi System Operating Frequencies (EU/EFTA):
Easy Setup via RS WiFi App: The system is managed through the dedicated RS WiFi App, available for both iOS and Android devices. The app guides users through the entire setup process, from connecting the primary node to configuring secondary nodes and customizing network settings.
Primary Node Connection: The primary node connects to a modem or Ethernet jack via its WAN/LAN port. Users must power off their modem, connect the Ethernet cable, and then power on the modem and the primary node. The LED indicator on the primary node will blink green during startup and turn solid green when connected to the internet.
Secondary Node Placement and Connection: Secondary nodes should be placed in elevated, open positions within the coverage area of the existing WiFi network, away from strong interference sources like microwave ovens or refrigerators. Once powered on, secondary nodes automatically connect to the primary node. Their LED indicators provide status feedback:
Network Customization: Users can change the WiFi network's SSID and password through the RS WiFi App's Wireless Settings.
Network Expansion: Additional nodes can be added to expand network coverage using the "Add Nova" feature in the app's Settings.
AP Mode: The system supports AP (Access Point) mode, configurable via the app under Settings > Internet Settings > Connection Type, by selecting "Bridge."
Smart Assistant for 2.4G Devices: For devices that only support 2.4 GHz WiFi (e.g., some smart home cameras), the "Smart Assistant" feature in the app's Settings can temporarily switch the mesh system to a 2.4 GHz band for 30 minutes to facilitate connection. After this period, the system reverts to its dual-band operation.
WPS Functionality: If a 2.4 GHz WiFi-enabled device supports WPS, users can enable WPS on the nearest mesh node via the RS WiFi App (Settings > WPS) and then activate WPS on the device within 2 minutes to establish a connection.
Online After-sales Service: A 24-hour online after-sales service is available via a QR code link (https://rockspace.afterservice.vip) for support.
Factory Reset: The network can be restored to factory settings by holding the Reset button on the primary node with a paper clip for approximately 6 seconds while the nodes are powered on. The LED indicator will blink fast, then light solid, and then blink again to confirm the reset. This action restores all nodes to their factory settings.
Node Removal: Individual nodes can be removed from the WiFi network using the RS WiFi App. Tapping the node in the app and selecting "Delete" will restore that specific node to its factory settings.
Troubleshooting: The manual provides guidance for common issues, such as connecting 2.4 GHz devices and printer connectivity. For printer connection issues, users are advised to ensure they have the latest app version, try disabling "Fast Roaming," and contact tech support with printer information if problems persist.
LED Indicator Descriptions: The LED indicators on each node provide visual feedback on the connection status, aiding in troubleshooting and optimal placement.
Technical Support: Comprehensive technical support is available via email (techsupport@rockspace.cc) and phone (+1(833)816-6558) during specified hours (EST: 9:00-17:00 / PDT: 06:00-14:00, Monday to Friday).
Recycling Information: The product is marked with the WEEE symbol, indicating it should be handled as electronic waste and recycled according to European directive 2012/19/EU.
Firmware Updates: While not explicitly detailed as a user-initiated feature, the mention of a specific software version (V1.0.0.32) implies that firmware updates may be available to improve performance and address issues. Users are encouraged to visit the rock space official website for specific usage instructions and news (www.rockspace.hk/en/news.aspx).
General| Brand | rock space |
|---|---|
| Model | RSD0613 |
| Category | Network Hardware |
| Language | English |
To Next Page
