10
Specifications
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of
this product is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply within
the limits for a class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
AC wall socket input cable
5.7’ (174 cm)
DC power output cable
3.9’ (119 cm)
AC input voltage
100~240V AC, 50-60Hz ~2.5 A
DC output voltage
19 Volts DC
DC output current
4.74 Amps maximum continuous
Output power
90 W maximum (AC)
Weight
9.6 oz. (272 g)
Adapter dimensions
(LxWxH)
5.0 x 2.2 x 1.3 inches
(126 x 56 x 32 mm)
RF-AC9021 12-0836_MAN_V2.fm Page 10 Monday, August 6, 2012 1:30 PM
To Next Page
Loading...
Need help?
General
