OUTPUT1 OUTPUT2INPUT
OUTPUT1 OUTPUT2INPUT
Back
Front
PACKAGE CONTENTS
• HDMI splitter
• AC power adapter
• Quick Setup Guide
FEATURES
• Supports 3D video
• 480i to 4K@60 Hz (4K UHD) from the source device
• Supports 18 Gbps bandwidth
• Compatible with most TVs, projectors, and video displays with HDMI inputs
• Gold-plated connectors for maximum signal transfer and corrosion resistance
• Supports HDMI CEC commands for remote control functionality
• Wall-mountable with integrated key-hole slots (hardware not included).
HDMI SPLITTER BASICS
This Rocketsh two-way HDMI splitter will send HDMI audio and video signals from a
single source, such as a Blu-ray/DVD player or cable/satellite box, to two destinations,
such as a TV and an AV receiver. It is ideal for sending the audio signal from a 4K source to
an AV receiver (one that does not support 4K video pass-through), and video signal to a
4K UHD TV.
SETTING UP YOUR HDMI SPLITTER
1 Connect a high-speed HDMI cable (not included) from your video source to the INPUT
port on the HDMI splitter.
2 Connect another high-speed HDMI cable from your HDMI splitter’s OUTPUT1 or
OUTPUT2 port to the IN port of an audio or display device.
3 Connect the included AC power adapter from the micro USB port on the HDMI splitter
to a standard 120V AC power outlet. The Power LED indicator on the front lights white.
4 Turn on all connected devices and operate. When you are nished, you can leave your
HDMI splitter plugged in.
QUICK SETUP GUIDE
RF-G1603 / RF-G1603-C, 4K HDMI Splitter
HDMI
OUT 1
HDMI IN
HDMI
OUT 2
Micro USB
5V/1A
HDMI version
Video signal bandwidth
Resolutions supported
HDMI HDCP
Power
Dimensions
2.0b
18 Gbps
480i to 4K@60 Hz (4K UHD) from the source device
Compliant with HDCP 2.2
5 VDC / 1,000 mA (5 W max) Micro USB
3.9 × 3.4 × 1.1 in. (100 × 87 × 27 mm)
Before using your new product, please read these instructions to prevent any damage.
SPECIFICATIONS
TROUBLESHOOTING
Make sure that the HDMI splitter’s power adapter is plugged in.
• Make sure that you are using high-speed HDMI cables for all
connections.
• Make sure that the TV’s video resolution supports the video
source’s output resolution.
• Make sure that the audio and video formats of the content
being used (such as Blu-ray disc) are supported by all
connected devices.
• Make sure that your destination components (such as TV and
AV receiver) are set to the correct HDMI inputs.
• Make sure that you are using High-Speed HDMI cables for all
connections. To fully support 4K resolution, you should use
HDMI PREMIUM Certied Cable.
• Very long length of cables (over 20 ft./6.1 m) may cause a loss of
video signal or downgrade to lower resolution. Use a shorter
cable, if possible.
• Unplug the HDMI splitter’s AC power adapter, then plug it back
in again.
Power LED is not on
Video has
interference
No video and/or
audio
Problem Possible solution
HD TV
Soundbar
Micro USB
Monitor
OUTPUT1 OUTPUT2INPUT
HDMI
Blu-ray player
Cable/Satellite box
Game
console
Streaming
sticks/boxes
AV receiver
HDMI
HDMI
OR
OR OR
OR
OR
OR
OR
Projector
Display devices
Audio devices
Video sources
Power
outlet
AC power
adapter
OR
Power LED
YOU WILL NEED
High-speed HDMI cables, such as Rocketsh,
available in multiple lengths.
Note: Using this product with 4K @60Hz video will
require the use of 18 Gbps bandwidth cables for best
performance.
RF-G1603_-C_20-0463_QSG_V4_EN_Final.ai 1 9/25/2020 9:08:28 AM
To Next Page
Need help?
General
