RocketFish RF-HD35 User Manual

5RF-HD35
2 Turn the tray over, place the hard drive into the tray, connecting the
power and data cables, then secure the drive to the tray with four screws
(provided).
3 Slide the assembled tray into the bottom of the enclosure, then put the
top on the enclosure with the Rocketfish logo on the same end as the
one-touch button and secure it with the four screws you previously
removed.

RocketFish RF-HD35 Specifications

General

Brand	RocketFish
Model	RF-HD35
Category	Enclosure
Language	English