Rockford Fosgate RFX9000 User Manual (English)

Other manuals for Rockford Fosgate RFX9000

Questions and Answers:

J
jcarneyAug 20, 2025
Why my Rockford Fosgate RFX9000 source unit does not turn on?
- L
  Lynn GuzmanAug 20, 2025
  If your Rockford Fosgate Car Receiver's source unit does not turn on, first check the battery, connections, and fuses, and repair or replace them if needed. Ensure the voltage applied to the red and yellow wires is between 10.8 and 16 volts. If the voltage exceeds +16 volts, have the electrical system inspected by an authorized car service center. Also, verify that the unit is properly grounded by checking the wiring and making any necessary repairs.
T
Teresa GuerreroAug 23, 2025
How to fix CD skipping excessively on Rockford Fosgate RFX9000?
- Y
  Yolanda EllisAug 25, 2025
  If your Rockford Fosgate Car Receiver's CD skips excessively, check the mounting angle of the source unit, ensuring it's within ±20° from horizontal, and repair if necessary. For standard mounts, check the tightness of the installation sleeve and back strap, repairing or replacing as needed. If you have an ISO mount, check the tightness of the mounting screws and repair or replace as necessary.
D
Dr. Heather OdonnellAug 26, 2025
Why does my Rockford Fosgate RFX9000 IR remote has poor range?
- K
  Kayla RodriguezAug 26, 2025
  If your Rockford Fosgate Car Receiver's IR remote has poor range, first check the battery condition and replace it with a CR2025 (+3 volt) battery if necessary. Clean the transmitter and receiver lenses with a Plexiglas solution and a non-abrasive cloth to remove any dirt or dust. Ensure that you are operating the remote within approximately 15 feet and ±45° from the horizontal of the source unit’s faceplate. High sunlight conditions can also affect the range, so try operating the remote closer to the unit.
C
Clayton SandersAug 27, 2025
Why does my Rockford Fosgate RFX9000 Car Receiver tuner has poor reception?
- M
  Michelle KelleyAug 27, 2025
  If your Rockford Fosgate Car Receiver's tuner has poor reception, check the antenna connections and ensure it's properly grounded to the vehicle, repairing or replacing as necessary. Disconnect the antenna and test with a known working antenna to see if the tuner works; if it does, check the installation and repair the antenna. If the antenna is the wrong type for AM/FM frequencies, consult your local Authorized Rockford Fosgate Dealer for proper antenna selection.
C
Candice RobinsonAug 30, 2025
What to do if my Rockford Fosgate Car Receiver IR remote does not work?
- C
  Cesar WeaverAug 30, 2025
  If your Rockford Fosgate Car Receiver's IR remote does not work and the LED does not illuminate, check the battery condition and replace it with a new CR2025 (+3 volt) battery if needed. Verify that the battery is installed correctly, ensuring the polarity matches the indication on the PC board.
J
Jenna WilliamsAug 31, 2025
Why do my Rockford Fosgate RFX9000 Car Receiver speakers pop when turning on/off?
- M
  meagansilvaSep 1, 2025
  If your Rockford Fosgate Car Receiver's speakers pop when turning the source unit on or off, check the wiring of the auto antenna and remote B+ to ensure they are configured properly, repairing as necessary. Check connections and bypass all components between the source unit and the amplifier, connecting one component at a time to determine the culprit. Connect this component to the Blue wire and check for pops. Repair or replace the component if needed.
J
Joseph AguilarSep 3, 2025
What does ERROR 7 mean on Rockford Fosgate RFX9000?
- D
  Daniel ZimmermanSep 3, 2025
  If your Rockford Fosgate Car Receiver displays ERROR 7 (Servo Error), clean the disc to remove any dirt or dust. If the disc is warped, cracked, or severely damaged, try a different disc. Also, try a different disc if the current one has excessive scratches.
J
josephhahnSep 5, 2025
What does ERROR 9 mean on Rockford Fosgate RFX9000?
- L
  Lauren CarterSep 5, 2025
  If your Rockford Fosgate Car Receiver displays ERROR 9 (TOC Error), try using a different disc to rule out issues with the disc itself, such as it being cracked, warped, or severely damaged. If the issue persists, the laser pickup may be defective, requiring repair by a service center. Additionally, the servo unit in the CDP mechanism might not be operating properly, necessitating a check of the servo circuit area and repair as needed.
D
Dakota CareySep 7, 2025
What does ERROR 3 mean on Rockford Fosgate RFX9000 Car Receiver?
- A
  Anna SharpSep 7, 2025
  If your Rockford Fosgate Car Receiver displays ERROR 3 (Loading Error), check the CDP mechanism load area for any foreign objects by removing the faceplate, and repair as necessary. If the loading area in the mechanism and loading motor (or driving circuit) is defective, repair the mechanism and loading motor (or driving circuit).
B
Brett FrenchSep 9, 2025
What does ERROR 4 mean on Rockford Fosgate RFX9000?
- D
  duncanrichardSep 9, 2025
  If your Rockford Fosgate Car Receiver displays ERROR 4 (Eject Error), check the CDP mechanism eject area for any foreign objects by removing the faceplate, and repair if necessary. If the eject area in the mechanism and ejecting motor (or driving circuit) is defective, repair the mechanism and loading motor (or driving circuit).