Rockford Fosgate RFX9320 User Manual (English)

Questions and Answers:

T
Taylor AllenAug 13, 2025
How to fix a Rockford Fosgate RFX9320 that does not turn on?
- M
  Matthew GarciaAug 13, 2025
  If your Rockford Fosgate Car Receiver is not turning on, it could be due to a few reasons. First, check that the voltage applied to the red and yellow wires is between 10.8 and 16 volts. Inspect the battery, connections, and fuses, repairing or replacing them if needed. If the voltage exceeds +16 volts, it's recommended to have the electrical system inspected by a certified car service center. Another potential cause is improper grounding. In this case, check the wiring and repair as necessary.
C
Catherine BurnsAug 16, 2025
Why does my Rockford Fosgate Car Receiver have poor radio reception?
- K
  Kristina WellsAug 16, 2025
  If your Rockford Fosgate Car Receiver's tuner has poor reception, the issue might be with the antenna. Start by checking the antenna connections and its grounding to the vehicle, repairing or replacing parts as necessary. Also, the antenna cable may be damaged or intermittent. Disconnect the current antenna and test with a known working one. If the tuner then works, check the installation and repair the original antenna. Finally, ensure that the antenna is the correct type for AM/FM frequencies; consult an authorized Rockford Fosgate dealer for proper antenna selection if needed.
J
Joel JamesAug 20, 2025
What to do if Rockford Fosgate RFX9320 Car Receiver speakers pop when turning on/off?
- T
  tonya31Aug 20, 2025
  If you are experiencing popping sounds from the speakers when turning your Rockford Fosgate Car Receiver on or off, it could be due to improperly configured auto antenna and remote B+. Check the wiring and repair as needed. Another possible cause is a bad component in the signal chain. Check connections and bypass all components between the source unit and the amplifier, connecting one component at a time to identify the faulty one. Connect this component to the Blue wire and check for pops. Repair or replace the component as necessary.
J
Jessica RoweAug 23, 2025
What does ERROR 3 mean on my Rockford Fosgate Car Receiver and how do I fix it?
- G
  greenbarbaraAug 23, 2025
  If your Rockford Fosgate Car Receiver displays ERROR 3 (Loading Error), it could be due to a couple of reasons. First, there might be foreign objects preventing the disc from loading. Check the CDP mechanism load area by removing the faceplate and repair as necessary. Second, the loading area in the mechanism or the loading motor (or driving circuit) might be defective. In this case, repair the mechanism and loading motor (or driving circuit).
K
ksimmonsAug 27, 2025
How to fix ERROR 4 (Eject Error) on a Rockford Fosgate RFX9320 Car Receiver?
- C
  Cameron WillisAug 27, 2025
  If your Rockford Fosgate Car Receiver shows ERROR 4 (Eject Error), it indicates a problem with the disc ejection mechanism. This could be due to foreign objects preventing the disc from ejecting. Inspect the CDP mechanism eject area by removing the faceplate and repair as necessary. Alternatively, the eject area in the mechanism or the ejecting motor (or driving circuit) might be defective, requiring repair of the mechanism and loading motor (or driving circuit).
T
thomasnicholasAug 31, 2025
What to do if my Rockford Fosgate RFX9320 has no backlight illumination?
- B
  Brian AllisonAug 31, 2025
  If there is no backlight illumination on your Rockford Fosgate Car Receiver, the detachable faceplate may not be properly connected. Detach the faceplate and reinstall it into the chassis.
J
James RiceSep 4, 2025
What does ERROR 1 mean on my Rockford Fosgate RFX9320 Car Receiver?
- N
  nealmelanieSep 4, 2025
  If your Rockford Fosgate Car Receiver displays ERROR 1 (Initialize Error), it could be due to a couple of reasons: either there was no initialization, or the mechanism is jammed and the loading motor (or driving circuit) is defective. Try pressing the reset button. If that doesn't work, the mechanism and loading motor (or driving circuit) may need repair.
D
Danielle ReyesSep 8, 2025
What does ERROR 6 mean on a Rockford Fosgate RFX9320 Car Receiver?
- R
  ricky52Sep 8, 2025
  If your Rockford Fosgate Car Receiver displays ERROR 6 (Transverse Error), the transverse motor or switch may be defective, or the traverse area of the disc may be damaged. Check the CD mechanism motor and switch, and try using a different disc.