Rockford Fosgate RFX9110 User Manual (English)

Questions and Answers:

J
jamesmillerAug 16, 2025
Why does my Rockford Fosgate RFX9110 tuner have poor reception?
- A
  Amanda WeissAug 16, 2025
  If your Rockford Fosgate Car Stereo System tuner has poor reception, the antenna might be disconnected or improperly grounded to the vehicle. Check the antenna connections and installation, repairing or replacing as needed. The antenna cable might also be intermittent or damaged; disconnect the antenna and test with a known working antenna. If the tuner then works, check the installation and repair the antenna. Finally, the antenna might be the wrong type for AM/FM frequencies; consult your local Authorized Rockford Fosgate Dealer for proper antenna selection.
M
marquezmichaelAug 19, 2025
Why my Rockford Fosgate Car Stereo System does not turn on?
- D
  deleonaudreyAug 19, 2025
  If your Rockford Fosgate Car Stereo System isn't turning on, it could be due to insufficient or excessive voltage on the red and yellow wires (not between 10.8 and 16 volts). Check the battery, connections, and fuses, and repair or replace them as needed. If the voltage exceeds +16 volts, have the electrical system inspected by a certified car service center. Also, ensure the unit is properly grounded by checking the wiring and making necessary repairs.
T
tloveAug 22, 2025
What to do if my Rockford Fosgate RFX9110 speakers pop when turning on/off?
- F
  franciscoreedAug 22, 2025
  If your Rockford Fosgate Car Stereo System speakers are popping when turning the unit on or off, the auto antenna and remote B+ might not be configured correctly. Check the wiring and repair as necessary. A bad component in the signal chain could also be the cause. Check connections and bypass all components between the source unit and the amplifier, connecting one component at a time to identify the faulty one. Connect this component to the Blue wire and check for pops. Repair or replace the component as needed.
E
Ethan DavisAug 26, 2025
What to do if a disc will not load into my Rockford Fosgate RFX9110 Car Stereo System?
- M
  Margaret NovakAug 26, 2025
  If your Rockford Fosgate Car Stereo System disc will not load, it may be due to the voltage applied to the Red and Yellow wires not being between 10.8 and 16 volts, or there may be no voltage present. Check the battery, connections, and fuses, and repair or replace as necessary. If the voltage is above +16 volts, have the electrical system inspected by an authorized car service center.
R
randy21Aug 28, 2025
What to do if my Rockford Fosgate RFX9110 shows ERROR 3 (Loading Error)?
- D
  Donna CurryAug 28, 2025
  If your Rockford Fosgate Car Stereo System displays ERROR 3 (Loading Error), foreign objects might be preventing the disc from loading. Check the CDP mechanism load area by removing the faceplate and repair as necessary. The loading area in the mechanism and loading motor (or driving circuit) could also be defective; in this case, repair the mechanism and loading motor (or driving circuit).
W
Walter MckinneyAug 31, 2025
What to do if my Rockford Fosgate RFX9110 Car Stereo System shows ERROR 4 (Eject Error)?
- B
  Benjamin EdwardsAug 31, 2025
  If your Rockford Fosgate Car Stereo System displays ERROR 4 (Eject Error), foreign objects might be preventing the disc from ejecting. Check the CDP mechanism eject area by removing the faceplate and repair as necessary. The eject area in the mechanism and ejecting motor (or driving circuit) could also be defective; in this case, repair the mechanism and loading motor (or driving circuit).
M
Michael EllisSep 3, 2025
What to do if a disc will not eject from my Rockford Fosgate Car Stereo System?
- T
  toddlatashaSep 3, 2025
  If your Rockford Fosgate Car Stereo System disc will not eject, it could be because the voltage applied to the Yellow wire is not between 10.8 and 16 volts, or there is no voltage present. Check the battery, connections, and fuses, and repair or replace as necessary. If the voltage is above +16 volts, have the electrical system inspected by an authorized car service center.
P
pittmandeniseSep 6, 2025
What to do if my Rockford Fosgate RFX9110 Car Stereo System shows ERROR 6 (Transverse Error)?
- R
  roger77Sep 7, 2025
  If your Rockford Fosgate Car Stereo System displays ERROR 6 (Transverse Error), the transverse motor or switch might be defective, or the traverse area of the disc could be damaged. Check the CD mechanism motor and switch. Try using a different disc.
R
rbirdSep 9, 2025
How to fix no backlight illumination on my Rockford Fosgate RFX9110 Car Stereo System?
- C
  Crystal LoveSep 9, 2025
  If your Rockford Fosgate Car Stereo System is not illuminating the backlight, it may be due to the detachable faceplate not being properly connected. Detach the faceplate and reinstall it into the chassis.

Rockford Fosgate RFX9110 Specifications

General

Brand	Rockford Fosgate
Model	RFX9110
Category	Car Stereo System
Language	English

Summary

Introduction

Practice Safe Sound

Important safety advice on protecting hearing from high sound pressure levels.

Getting Started

Safety Instructions

Critical warnings and cautions for user safety during installation and operation.

Precautions

Important handling and environmental considerations for the unit and accessories.

Contents of Carton

Lists all items included in the product packaging.

Installation

Installation Considerations

Tools needed and general advice for a successful installation process.

Center Console Mounting

Details on installing the source unit in the center console, ensuring proper angle.

Glove Box Mounting

Guidelines for mounting the source unit in a glove box, ensuring accessibility.

Under Dash Mounting

Instructions for mounting the source unit under the dashboard for access.

Wiring the System

Step-by-step instructions for connecting the source unit's wiring harness.

Standard Mount Installation

Detailed steps for installing the source unit using the standard mounting method.

ISO-DIN Mount Installation

Detailed steps for installing the source unit using the ISO-DIN mounting method.

Source Unit Features

Control Panel Description

Detailed explanation of the front panel controls and their functions.

IR Remote Control Features

Explains special functions and operation of the infrared remote controller.

Operation - Basic

Initial Setup and Detachable Faceplate

Covers initial setup, detaching, and attaching the faceplate.

Reset Button and Power Management

Instructions for using the reset button and controlling power.

Volume and Tone Control Functions

Explains how to adjust volume, tone settings, and manage tone memory.

Setup Options and Configuration

Details the available setup options like DX/LOCAL and Americas/EUR/AUST.

Core Operational Features

Details features like P. PLAY, Volume Bar, Initial Volume, Contrast, etc.

Clock Setting and Mode Selection

Instructions for setting the clock and selecting operating modes.

Mute Functionality

Explains how to use the mute function to dampen volume.

Punch Feature and Panel Display

Explains the Punch feature, panel display modes, and default settings.

Operation - Tuner

Selecting Radio Bands

How to switch between FM1, FM2, and AM radio bands.

Tuner Options and Settings

Explains tuner options like DX/LOCAL and Americas/EUR/AUST.

Station Selection and Presets

How to select stations manually, set presets, and use auto store.

AF/TP Mode Operation

Details Traffic Program (TP) and Alternative Frequencies (AF) modes.

PTY Mode and Region Settings

How to use Program Type (PTY) mode and Region Mode for radio stations.

Operation - CD Player

Basic CD Playback and Ejection

Instructions for playing CDs, ejecting discs, and understanding panel display.

Advanced CD Operations

Covers track selection, random play, repeat, forward/reverse, and track scan.

Pause and Direct Track Access

How to pause playback and directly access specific tracks on a CD.

CD Changer Operation and Loading

Details operation of the optional CD changer, including magazine loading.

CD Changer Mode and Disc Selection

How to operate the CD changer, select discs, and view panel display.

Operation - Title Programming

Programmable Disc Title Memory

How to program titles for stations, CDs, or AUX1 channels.

Title Erasing

Procedure for erasing programmed titles from memory.

Operation - MP3

Basic MP3 Playback

Instructions for playing MP3 discs and navigating basic playback.

Navigating the MP3 Directory

How to navigate folders and select songs by title in MP3 mode.

MP3 Playback Controls and Features

Details playback controls, fast forward/reverse, writing speed, and directory structure.

Troubleshooting

General Unit Problems

Addresses common issues like power, speakers, tuner reception, and disc handling.

CD Player and Disc Errors

Details errors related to CD loading, ejecting, disc condition, and playback.

CD Changer and Noise Issues

Covers troubleshooting for the CD changer and various types of noise.

IR Remote and CD Changer Communication

Addresses problems with the IR remote and CD changer communication.

Specifications

General and Tuner Specifications

Provides technical details for general operation and FM/AM tuners.

CD Player and IR Remote Specs

Details technical specifications for the CD player and IR remote.

Limited Warranty Information

Warranty Coverage and Exclusions

Outlines what is covered, not covered, and implied warranty limits.

Obtaining Service and Returns

Details the process for obtaining warranty service and returning products.

Related product manuals

Rockford Fosgate RFX9901DM

24 pages

Rockford Fosgate RFX8500 DVD

8 pages

Rockford Fosgate DSR1