Rockford Fosgate SYMMETRY EPX2 User Manual (English)

Other manuals for Rockford Fosgate SYMMETRY EPX2

Questions and Answers:

K
Kathryn RothAug 17, 2025
What to do if Rockford Fosgate SYMMETRY EPX2 EPX has no sound?
- A
  Amanda BarrettAug 17, 2025
  If your Rockford Fosgate Crossover EPX has no sound but the power LED is on, there are a few things you can check. First, make sure the source is properly selected by checking the Preamp Source and selecting the corresponding source input. Second, the signal from the source may not be connected or functioning correctly. Check the connections and try substituting with a known working source and cables, repairing or replacing as necessary. Finally, if you're using the BLT, the Balanced Line Input from the BLT might not be connected or functioning properly. Check the connections, substitute with a known working BLT and cables, and repair or replace as needed.
S
stephanie63Aug 25, 2025
What to do if Rockford Fosgate SYMMETRY EPX2 Crossover keyboard doesn't respond?
- M
  Michele MillerAug 25, 2025
  If the keyboard isn't responding properly on your Rockford Fosgate Crossover, consider these solutions: * Ensure no keys are depressed on the RDAT. * Check the RDAT cable connection and correct it if necessary. * Disconnect power to the EPX and then reconnect it to reset the microprocessor.
R
Renee PooleAug 27, 2025
How to reduce system hiss on Rockford Fosgate Crossover?
- K
  Kenneth SuttonAug 28, 2025
  If you're experiencing a high noise floor or system hiss with your Rockford Fosgate Crossover, try readjusting the input gain of the EPX using the Levels menu in the Setup.
G
gallagherkristinAug 31, 2025
What to do if new Rockford Fosgate Crossover software doesn't function correctly?
- D
  Douglas HolmesAug 31, 2025
  If new software isn't functioning correctly on your Rockford Fosgate Crossover, reset the memory using the Memory option from the Setup menu.
L
Lisa DaySep 3, 2025
Why is the output low from my Rockford Fosgate SYMMETRY EPX2 EPX?
- J
  Jennifer MaldonadoSep 3, 2025
  If you're experiencing low output from your Rockford Fosgate Crossover EPX, check the signal input jumpers (J1, J2 & J4, J5) to ensure the RCA/Balanced input jumpers are selected for the corresponding input and correct as necessary.
X
xbensonSep 7, 2025
Why is there high noise or low output in Rockford Fosgate SYMMETRY EPX2 when using Manual?
- J
  James WalshSep 7, 2025
  When using Manual from the Levels menu, if you encounter a high noise floor or low output on your Rockford Fosgate Crossover, the source unit output level may not be properly matched with the EPX. Refer to the source manual output settings to adjust accordingly. For example, setting 1.0 V corresponds to 200, 1.5 V to 180, 2.0 V to 164, 2.25 V to 157, 2.5 V to 150, 2.75 V to 145, 3.0 V to 139, 3.25 V to 134, 3.5 V to 129, 3.75 V to 125, and 4.0 V to 120.
D
davisrobertSep 10, 2025
Why is a feature not available on my Rockford Fosgate SYMMETRY EPX2 Crossover?
- J
  John JonesSep 10, 2025
  If a feature is not available on your Rockford Fosgate Crossover, select the DCard option from the setup menu.

Rockford Fosgate SYMMETRY EPX2 Specifications

General

Type	Electronic Crossover
Channels	2
Input Gain Adjustment	Yes
Output Gain Adjustment	Yes
Frequency Range	20Hz - 20kHz
Crossover Slope	12 dB/octave
Crossover Frequencies	Variable
Crossover Slopes	12dB/octave
Equalization	Yes
Output Level	Adjustable

Related product manuals

Rockford Fosgate Punch PP4-X

2 pages

Rockford Fosgate Punch X

19 pages

Rockford Fosgate AudioPhile LP-1

20 pages

Rockford Fosgate SYMMETRY EPX2 User Manual

Table of Contents

Other manuals for Rockford Fosgate SYMMETRY EPX2

Questions and Answers:

Rockford Fosgate SYMMETRY EPX2 Specifications

Related product manuals