Need help?Do you have a question about the Rockford Fosgate T1000-4ad and is the answer not in the manual?
General| Power Output (RMS) | 1000 Watts |
|---|---|
| Number of Channels | 4 |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 100 dB |
| Damping Factor | > 200 |
| Fuse Rating | 40A x 2 |
| Dimensions | 2.14" x 8.14" x 15.0" (5.4 cm x 20.7 cm x 38.1 cm) |
| Rated Power (4 Ohms) | 125 Watts x 4 |
| Rated Power (2 Ohms) | 250 Watts x 4 |
| Bridged Power (4 Ohms) | 500 Watts x 2 |
| Total Harmonic Distortion (THD) | <1.0% |
| Input Sensitivity | 0.2V - 4V |
| Crossover | Variable |
| Dimensions (H x W x D) | 2.14" x 8.14" x 15.0" (5.4 cm x 20.7 cm x 38.1 cm) |
| Class | D |
Warning about potential hearing loss from high sound pressure levels in car audio systems.
Important warnings and cautions regarding installation and product handling.
Essential safety rules and cautions to follow before and during installation.
Detailed steps and cautions for wiring the amplifier, including power, ground, and remote connections.
Procedure for setting the amplifier's input gain for optimal volume and signal-to-noise ratio.
Steps to verify power and ground connections if the unit is not turning on.
Diagnosing issues when the Protect or Thermal indicator lights are active.
To Next Page