Need help?Do you have a question about the Rockford Fosgate T400X2ad and is the answer not in the manual?
General| Power Output (RMS) | 125 Watts x 2 @ 4-Ohms |
|---|---|
| Number of Channels | 2 |
| Signal-to-Noise Ratio | > 100 dB |
| Input Sensitivity | 150 mV to 4 V |
| Crossover | HP/LP/AP 50Hz-500Hz 12dB/octave Butterworth |
| Fuse Rating | 30A |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | < 1.0 % |
| Speaker Output Connector | Screw terminals |
| Power Input Connector | Screw terminals |
Discusses safe sound practices and general safety guidelines with warning symbols.
Detailed technical specifications for T400X2ad, T400X4ad, T500X1br, T750X1bd, T1000X5ad models.
Covers input level, clip indicators, and signal input types.
Details on variable crossover, crossover switch, and Punch EQ.
Information on remote level control and input selection switches.
Explains Power/Protect LED, speaker, and power/REM terminals.
Details on the Infrasonic Filter and Input Switch functions.
Vehicle-specific points and tools required for amplifier installation.
Guidelines for optimal amplifier placement to ensure proper cooling and performance.
Considerations for the vehicle's electrical system and battery capacity.
Step-by-step instructions and precautions for connecting amplifier wiring.
Procedure to set the source unit volume for optimal input signal clipping.
Procedure to adjust input level knobs for proper output clip indicator illumination.
How to set the high-pass, low-pass, or all-pass crossover points.
How to set the switch for 2-channel or 4-channel input modes.
How to connect speaker-level signals and utilize auto turn-on.
Explanation of how the Punch EQ variable bass/treble boost works.
Details on installing and using the optional remote control for level adjustment.
Steps to check power light, fuses, ground, and voltage for proper operation.
Diagnosis for the protect light, usually related to speaker shorts or impedance.
Steps to verify RCA connections and test audio output.
How to resolve popping sounds when turning the amplifier on/off.
Strategies to eliminate engine noise in the audio signal.
Troubleshooting steps for non-functioning remote switches or lights.
Outlines what is covered, who is covered, and what is excluded under the warranty.
Discusses limitations on implied warranties and how to obtain service.
To Next Page
