Need help?Do you have a question about the Rockford Fosgate T1S1-10 and is the answer not in the manual?
General| Power Handling (RMS) | 600 Watts |
|---|---|
| Power Handling (Peak) | 1200 Watts |
| Sensitivity | 83 dB |
| Size | 10 inch |
| Voice Coil | Dual |
| Mounting Cutout Diameter | 9.25 inch |
| Impedance | 1 Ohm |
| Voice Coil Diameter | 2.5" (64.7 mm) |
Guidelines for safe listening levels to prevent hearing loss from high-powered audio systems.
Alerts about potential hazards (WARNING, CAUTION) and instructions for safe installation and operation.
Confirms compliance with industry standards for power handling under continuous demand.
Indicates that loudspeaker engineering personnel are trained and certified by Klippel for design and testing.
Illustrations showing key dimensions (A, B, C, D) for T1S1/T1S2-10 and T1S1/T1S2-12 models.
Details advantages of sealed enclosures like small size, linear response, and excellent sound quality.
Explains vented enclosures, their tuning, and advantages like higher output and deep bass.
Presents a graph comparing the F3 drop-off point between sealed and vented enclosures.
Provides recommended internal volumes and dimensions for sealed enclosures for 10" and 12" models.
Diagram illustrating parallel wiring for two 2-ohm SVC speakers resulting in a 1-ohm load.
Diagram illustrating series wiring for two 1-ohm SVC speakers resulting in a 2-ohm load.
Explains passive and active crossovers and recommends an active 80-100Hz low-pass crossover.
Details warranty length, coverage, exclusions, and limitations on implied warranties for product.
Provides instructions on how to obtain service, including contacting dealers and obtaining an RA number.
To Next Page