Need help?Do you have a question about the RockHound BrushHound 30EX and is the answer not in the manual?
Guidelines for safe operation of the machinery, including training, PPE, and environmental awareness.
Procedures for safe maintenance, ensuring power is off, hydraulics depressurized, and using proper safety gear.
Steps for securely connecting the BrushHound attachment to the power unit, including hydraulic hookups and safety checks.
Steps for safely shutting down the attachment and power unit after operation, ensuring hydraulics are depressurized.
Instructions for effective operation of the attachment for various vegetation types and conditions.
Tips for efficient operation, avoiding abuse, and maintaining cutting performance and machine longevity.
Procedures for safe transportation, removal, and storage of the attachment, ensuring machine balance and security.
Safety precautions before and during service tasks, including disengaging power, using PPE, and securing the machine.
Details on lubrication points, recommended greases, schedules, and signs of over-greasing for bearings.
Guidance on inspecting and replacing wearable components like rubber isolation disks for optimal machine health.
Instructions for sharpening and replacing cutting knives to ensure maximum cutting efficiency and performance.
Procedures for cleaning the attachment to maintain paint, decals, and minimize fire risk from debris.
Information on acquiring and attaching optional mounts for use with different power units, ensuring compatibility.
Explanation of the hydraulic circuit connections, including pressure in/out ports and check valve placement.
Identification and quantities of general components listed for the BrushHound attachment, with part numbers.
Detailed breakdown of the cutter drum, motor, spindle, and related drive components with part numbers.
List and identification of hydraulic system components, including motors, hoses, fittings, and check valves.
General| Shred Type | Cross-Cut |
|---|---|
| Shred Capacity | 30 Sheets |
| Security Level | P-4 |
| Run Time | 30 minutes |
| Cool Down Time | 30 minutes |
To Next Page
