Need help?Do you have a question about the Rocktron HUSH Super C and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Dynamic Range | >100dB |
| Power Supply | 9V DC |
| Type | Noise Reduction System |
| Inputs | 1/4" unbalanced |
| Outputs | 1/4" unbalanced |
| Input Impedance | 1 MOhm |
| Output Impedance | 1 kOhm |
| Frequency Response | 20 Hz to 20 kHz |
Indicates power status and readiness for operation.
Sets the point for expander and dynamic filter operation.
Determines gate activation level and indicates gate status.
Bypasses noise reduction when not needed and indicates active status.
Adjusts sensitivity for different audio equipment reference levels.
¼" mono jacks for left and right channel inputs.
¼" mono jacks for left and right channel outputs.
2.5mm pin jack for accepting power from the AC adapter.
Illustrates system connection setup for mono guitar applications.
Illustrates system connection setup for stereo guitar applications.
Shows how to connect the unit to a guitar combo amplifier's effects loop.
Illustrates connecting the unit to a guitar amplifier head's effects loop.
Shows connection setup for a bass combo amplifier's effects loop.
Illustrates connecting the unit to a bass amplifier head's effects loop.
Explains Rocktron's patented HUSH noise reduction and dynamic filtering.
Details the noise gate function and its controls for silencing output.
To Next Page
