To Next PageTo Next Page
Need help?Do you have a question about the Rocktron HUSH and is the answer not in the manual?
General| Technology | Analog |
|---|---|
| Input Impedance | 1M Ohm |
| Signal to Noise Ratio | >90dB |
| Bypass | True Hard Bypass |
| Controls | Threshold |
| Input | 1/4" |
| Output | 1/4" |
| Power Source | 9V DC (Battery or Adapter) |
| Frequency Response | 20Hz to 20kHz |
Provides essential guidelines for safe operation, cleaning, and placement of the device.
Stresses the importance of professional servicing and warns against internal adjustments or tampering.
Specifies the recommended operating temperature limits to ensure proper functionality and prevent damage.
Introduces the HUSH The Pedal and its primary function of eliminating amplifier noise without affecting tone.
Explains how the HUSH technology reduces noise by controlling gain based on signal level and threshold settings.
Details V.I.R. technology for dynamic release and provides guidance on setting the THRESHOLD control.
Identifies and explains the function of the pedal's switch, controls, LED, input/output jacks, and power connector.
Advises on the correct positioning of the HUSH The Pedal within a guitar effects signal chain.
Lists key technical specifications including impedance, output, frequency response, and power requirements.
