To Next PageTo Next Page
Need help?Do you have a question about the Rocktron INTELLIFEX LTD and is the answer not in the manual?
Input and Output| maximum input | +20 dBu |
|---|---|
| maximum output | +20 dBu |
| nominal input range | +4 dBu to -21 dBu |
| input impedance | 470 Kohms |
| output impedance | 120 ohms |
Performance| dynamic range | 104 dB HUSH In, 94 dB HUSH Out |
|---|---|
| thd + n | 0.009% |
| dry frequency response | 10 Hz to 100 KHz +0.25, -1.5 dB |
| wet frequency response | 10 Hz to 18 KHz +0.5, -3 dB |
Unit power input, voltage doubler, noise minimization.
Recommended operating temperature range for the unit.
Highlights unique features and benefits of the Intellifex LTD.
Steps to recall a saved preset from memory.
Procedure to save adjusted parameters to a preset.
How to adjust individual effect parameters within a preset.
Detailed explanation of each control on the Intellifex LTD front panel.
Description of all input/output jacks and their functions on the rear panel.
Diagram showing connection to mixer auxiliary sends and returns.
Illustrates connecting a keyboard and mixer to the Intellifex LTD.
Diagram for connecting the Intellifex LTD in a guitar rack setup.
Explains the digital mixer's function for controlling signal levels in presets.
Description of the 8 available reverb types (Plate, Room, Hall, Stadium, Dual).
Explanation of parameters like Reverb Input, Level, Decay, Damping.
Details the Stereo, Ping-Pong, and 2-Tap delay types.
Explanation of parameters like Delay, Mute Type, Level, Pan, Time, Regen.
Explanation of Ducker, Sensitivity, Attenuation, and Release Rate parameters.
How the chorus effect is created and its parameters.
How pitch shifting works and its parameters.
Explanation of Hush I/O, Exp Thresh, and Rel Rate parameters.
How to choose and view the different effect configurations.
Diagram of the signal flow for this specific configuration.
List of mixer parameters for this configuration.
List of HUSH parameters for this configuration.
Parameters for Voice/Delay 1, repeated for other voices.
List of Ducker parameters for this configuration.
List of Reverb parameters for this configuration.
Diagram of the signal flow for the HUSH; REVERB configuration.
Mixer parameters for the HUSH; REVERB configuration.
HUSH parameters for the HUSH; REVERB configuration.
Reverb parameters for the HUSH; REVERB configuration.
Signal flow diagram for the 2-Tap delay in this configuration.
Signal flow diagram for the Stereo delay in this configuration.
Signal flow diagram for the Ping-Pong delay in this configuration.
Mixer parameters for HUSH; DELAY; DUCKER config.
HUSH parameters for HUSH; DELAY; DUCKER config.
Delay parameters for HUSH; DELAY; DUCKER config.
Ducker parameters for HUSH; DELAY; DUCKER config.
Diagram of signal flow for the 8 Voice Chorus/Delay configuration.
Mixer parameters for the 8 Voice Chorus/Delay config.
HUSH parameters for the 8 Voice Chorus/Delay config.
Parameters for Voice/Delay 1 in this config.
Diagram of signal flow for the HUSH; Pitch Shift; Delay config.
Mixer parameters for the HUSH; Pitch Shift; Delay config.
HUSH parameters for the HUSH; Pitch Shift; Delay config.
Parameters for Voice 1 in this config.
Diagram of signal flow for the HUSH; Pitch Shift; Delay; Reverb config.
Mixer parameters for the HUSH; Pitch Shift; Delay; Reverb config.
HUSH parameters for the HUSH; Pitch Shift; Delay; Reverb config.
Parameters for Voice/Delay 1 in this config.
Parameters for Voice/Delay 2 in this config.
Parameters for Delay 3 in this config.
Ducker parameters for this config.
Reverb parameters for this config.
Step-by-step guide to recall a saved preset.
Detailed steps for modifying parameters within a preset.
Procedure to save modified parameter values to a preset.
Steps to change the name/title of a user preset.
How to designate a preset to load when the unit powers up.
How to map MIDI controllers to Intellifex parameters.
How to map MIDI program numbers to specific presets.
How to set the MIDI channel for receiving commands.
Procedure to transfer a single preset to another unit.
How to dump the entire user memory to a sequencer.
How to load user memory from a sequencer.
Explains common error messages related to MIDI operations.
Procedure to reset the unit to its factory defaults.
A list of all factory presets with their titles and configurations.
Details MIDI functions, transmitted/recognized messages, and remarks.
Lists technical measurements and conditions for the Intellifex LTD.
