Need help?Do you have a question about the Rocktron Velocity 120 and is the answer not in the manual?
General| Power Output | 120 Watts |
|---|---|
| Channels | 2 |
| Power Output (per channel) | 60 Watts |
| Power Output (bridged) | 120 Watts |
| THD+N | < 0.1% |
| S/N Ratio | > 90 dB |
| Speaker Configuration | 2x12 |
| Impedance | 4 ohms |
| Type | Solid State |
| Cooling | Fan |
| EQ | 3-band |
| Inputs | 2 x 1/4" |
| Outputs | 2 x 1/4" Speaker Outputs |
Controls for powering the amplifier on and indicating its status.
Controls for adjusting the output volume for each channel.
Controls for adjusting mid-frequency content for better instrument distinction.
Jacks for connecting speakers and audio sources to channels 1 and 2.
Controls for bridged mode operation and the main power inlet.
Diagram showing how to connect the amplifier for stereo operation.
Diagram showing how to connect the amplifier for mono bridged operation.
Details power output levels for various speaker impedance loads in stereo and bridged modes.
Crucial advice on using appropriate speakers and avoiding output connection errors.
Instructions on locating and replacing the main fuse with the correct type.
Explains the circuit that protects the unit from output shorts.
Describes the control for adjusting mid-frequency content for clarity.
To Next Page
